Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC5870N Top Searches

These results are ranked by popularity.

Error
E530-8002Description: There is an error in front alignment (finisher R1/R2). The home position sensor does not go on within a specific period of time after the front alignment motor has started to rotate.
E051-0001Description: The horizontal registration home position is not detected within a specific period of time. The horizontal registration position is faulty (0003). The horizontal registration home position is not detected within a specific period of time.
E593-8001Description: There is an error in the punch shift motor. (punch unit) The light-receiving voltage HP sensor does not go off at time of light emission.
E078-0001Description: The home position of the transfer belt cleaner unit (engagement) is not detected. The HP sensor does not turn on within 5 sec after the start of a HP search.
E719-0012Description: error in communication with coin vendor/card reader There is an IPC cable open circuit or an IPC communication error in relation to the card reader that cannot be reset.

Canon iRC5870N Common Errors

The most common error codes.

Error
E530-8002Description: There is an error in front alignment (finisher R1/R2). The home position sensor does not go on within a specific period of time after the front alignment motor has started to rotate.
E051-0001Description: The horizontal registration home position is not detected within a specific period of time. The horizontal registration position is faulty (0003). The horizontal registration home position is not detected within a specific period of time.
E593-8001Description: There is an error in the punch shift motor. (punch unit) The light-receiving voltage HP sensor does not go off at time of light emission.
E078-0001Description: The home position of the transfer belt cleaner unit (engagement) is not detected. The HP sensor does not turn on within 5 sec after the start of a HP search.
E719-0012Description: error in communication with coin vendor/card reader There is an IPC cable open circuit or an IPC communication error in relation to the card reader that cannot be reset.
E530-8002Description: There is an error in front alignment (finisher R1/R2). The home position sensor does not go on within a specific period of time after the front alignment motor has started to rotate.
E051-0001Description: The horizontal registration home position is not detected within a specific period of time. The horizontal registration position is faulty (0003). The horizontal registration home position is not detected within a specific period of time.
E593-8001Description: There is an error in the punch shift motor. (punch unit) The light-receiving voltage HP sensor does not go off at time of light emission.
E078-0001Description: The home position of the transfer belt cleaner unit (engagement) is not detected. The HP sensor does not turn on within 5 sec after the start of a HP search.
E719-0012Description: error in communication with coin vendor/card reader There is an IPC cable open circuit or an IPC communication error in relation to the card reader that cannot be reset.