Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC5800N Top Searches

These results are ranked by popularity.

Error
E197-0004Description: There is an error in the communication with the fixing feed PCB. At the start of drum initial multiple rotation, there is no signal indicating the start of 24V in the fixing assembly in the communication between the DC controller and the fi
E051-0001Description: The horizontal registration home position is not detected within a specific period of time. The horizontal registration position is faulty (0003). The horizontal registration home position is not detected within a specific period of time.
E002-0010Description: The rise in the temperature of the fixing assembly is not enough. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4). The AC driver PCB or the DC con
E020-xxA0Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For ATR control, the Sig value is lower than 62. The ATR sensor is damaged or has an open circuit. The connector has poor contact.
E743-0000Description: There is a DDI communication error. There is an SCI error. The reception data is faulty. A reception time-out condition has occurred. An SEQ timeout error has occurred. An SEQ time-out error has occurred.

Canon iRC5800N Common Errors

The most common error codes.

Error
E197-0004Description: There is an error in the communication with the fixing feed PCB. At the start of drum initial multiple rotation, there is no signal indicating the start of 24V in the fixing assembly in the communication between the DC controller and the fi
E051-0001Description: The horizontal registration home position is not detected within a specific period of time. The horizontal registration position is faulty (0003). The horizontal registration home position is not detected within a specific period of time.
E002-0010Description: The rise in the temperature of the fixing assembly is not enough. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4). The AC driver PCB or the DC con
E020-xxA0Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For ATR control, the Sig value is lower than 62. The ATR sensor is damaged or has an open circuit. The connector has poor contact.
E743-0000Description: There is a DDI communication error. There is an SCI error. The reception data is faulty. A reception time-out condition has occurred. An SEQ timeout error has occurred. An SEQ time-out error has occurred.
E197-0004Description: There is an error in the communication with the fixing feed PCB. At the start of drum initial multiple rotation, there is no signal indicating the start of 24V in the fixing assembly in the communication between the DC controller and the fi
E051-0001Description: The horizontal registration home position is not detected within a specific period of time. The horizontal registration position is faulty (0003). The horizontal registration home position is not detected within a specific period of time.
E002-0010Description: The rise in the temperature of the fixing assembly is not enough. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4). The AC driver PCB or the DC con
E020-xxA0Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For ATR control, the Sig value is lower than 62. The ATR sensor is damaged or has an open circuit. The connector has poor contact.
E743-0000Description: There is a DDI communication error. There is an SCI error. The reception data is faulty. A reception time-out condition has occurred. An SEQ timeout error has occurred. An SEQ time-out error has occurred.