Canon iRC5058 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC5058 Top Searches

These results are ranked by popularity.

Error
E717-0002Description: There is an error in the communication with the NE controller. An IPC open circuit or an IPC communication error is not reset.
E800-0001Description: The interlock 24V mechanism of the fixing unit is identified as being off. With the door closed, the interlock 24V mechanism remains off for 500 msec.
E008-0001Description: There is an error in relation to the life of the fixing assembly. The counter reading for the fixing roller has exceeded a specific count
E001-0003Description: The rise in the temperature of the fixing assembly is excessive. There is an open circuit or poor contact in the following: main thermistor (THM1, THM2, THM3), sub thermistor (THM4, THM5, THM6), or heater (H1, H2, H3, H4). The AC driver PCB
E5F1-0001Description: There is an error in saddle paper folding. The number of detection pulses of the paper folding motor clock sensor is lower than specified. The paper folding home position sensor or the paper folding motor clock sensor (P14S) is faulty.

Canon iRC5058 Common Errors

The most common error codes.

Error
E717-0002Description: There is an error in the communication with the NE controller. An IPC open circuit or an IPC communication error is not reset.
E800-0001Description: The interlock 24V mechanism of the fixing unit is identified as being off. With the door closed, the interlock 24V mechanism remains off for 500 msec.
E008-0001Description: There is an error in relation to the life of the fixing assembly. The counter reading for the fixing roller has exceeded a specific count
E001-0003Description: The rise in the temperature of the fixing assembly is excessive. There is an open circuit or poor contact in the following: main thermistor (THM1, THM2, THM3), sub thermistor (THM4, THM5, THM6), or heater (H1, H2, H3, H4). The AC driver PCB
E5F1-0001Description: There is an error in saddle paper folding. The number of detection pulses of the paper folding motor clock sensor is lower than specified. The paper folding home position sensor or the paper folding motor clock sensor (P14S) is faulty.
E717-0002Description: There is an error in the communication with the NE controller. An IPC open circuit or an IPC communication error is not reset.
E800-0001Description: The interlock 24V mechanism of the fixing unit is identified as being off. With the door closed, the interlock 24V mechanism remains off for 500 msec.
E008-0001Description: There is an error in relation to the life of the fixing assembly. The counter reading for the fixing roller has exceeded a specific count
E001-0003Description: The rise in the temperature of the fixing assembly is excessive. There is an open circuit or poor contact in the following: main thermistor (THM1, THM2, THM3), sub thermistor (THM4, THM5, THM6), or heater (H1, H2, H3, H4). The AC driver PCB
E5F1-0001Description: There is an error in saddle paper folding. The number of detection pulses of the paper folding motor clock sensor is lower than specified. The paper folding home position sensor or the paper folding motor clock sensor (P14S) is faulty.