These results are ranked by popularity.
| Error | |
|---|---|
| E732-0001 | Description: Reader communication error DDI-S communication error |
| E007-0002 | Description: Fixing belt or pressure belt deviation trouble Pressure belt deviation trouble (trouble in bottom belt push-off or in belt deviation sensor) |
| E5F4-8002 | Description: Saddle rear stapler error When the stitch operation home position sensor fails to turn ON even when the stitch motor (rear) has been run in the reverse direction for at least 0.5 sec. |
| E000-0101 | Description: Insufficient temperature rise of fixing unit when power is turned ON When the temperature of the pressure belt main thermistor failed to reach 50 deg C within 120 sec. after the pressure belt temperature regulation has started |
| E542-8004 | Description: Tray shift error When the input of the clock signal could not be detected within 0.2 sec. while the 2nd tray shift motor was running |
The most common error codes.
| Error | |
|---|---|
| E732-0001 | Description: Reader communication error DDI-S communication error |
| E007-0002 | Description: Fixing belt or pressure belt deviation trouble Pressure belt deviation trouble (trouble in bottom belt push-off or in belt deviation sensor) |
| E5F4-8002 | Description: Saddle rear stapler error When the stitch operation home position sensor fails to turn ON even when the stitch motor (rear) has been run in the reverse direction for at least 0.5 sec. |
| E000-0101 | Description: Insufficient temperature rise of fixing unit when power is turned ON When the temperature of the pressure belt main thermistor failed to reach 50 deg C within 120 sec. after the pressure belt temperature regulation has started |
| E542-8004 | Description: Tray shift error When the input of the clock signal could not be detected within 0.2 sec. while the 2nd tray shift motor was running |
| E732-0001 | Description: Reader communication error DDI-S communication error |
| E007-0002 | Description: Fixing belt or pressure belt deviation trouble Pressure belt deviation trouble (trouble in bottom belt push-off or in belt deviation sensor) |
| E5F4-8002 | Description: Saddle rear stapler error When the stitch operation home position sensor fails to turn ON even when the stitch motor (rear) has been run in the reverse direction for at least 0.5 sec. |
| E000-0101 | Description: Insufficient temperature rise of fixing unit when power is turned ON When the temperature of the pressure belt main thermistor failed to reach 50 deg C within 120 sec. after the pressure belt temperature regulation has started |
| E542-8004 | Description: Tray shift error When the input of the clock signal could not be detected within 0.2 sec. while the 2nd tray shift motor was running |
