Canon iRC3480i Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC3480i Top Searches

These results are ranked by popularity.

Error
E745Description: Token ring board error
E244-0000Description: Error in connection of the flexible cable on the DC controller PCB Error in connection of the flexible cable on the DC controller PCB (right side (1 pc.))
E604-0000Description: The image memory (SDRAM) is faulty/insufficient Memory capacity required for a model fails to be recognized.
E021-0000Description: Developing motor error Indicates that the signal indicates the motor rotates with the target speed is not sent to the port after passing more than 3 sec from the startup of the motor.
E592-8006Description: Puncher side registration sensor error Light receiving voltage at the time of non-light-emission is abnormal.

Canon iRC3480i Common Errors

The most common error codes.

Error
E745Description: Token ring board error
E244-0000Description: Error in connection of the flexible cable on the DC controller PCB Error in connection of the flexible cable on the DC controller PCB (right side (1 pc.))
E604-0000Description: The image memory (SDRAM) is faulty/insufficient Memory capacity required for a model fails to be recognized.
E021-0000Description: Developing motor error Indicates that the signal indicates the motor rotates with the target speed is not sent to the port after passing more than 3 sec from the startup of the motor.
E592-8006Description: Puncher side registration sensor error Light receiving voltage at the time of non-light-emission is abnormal.
E745Description: Token ring board error
E244-0000Description: Error in connection of the flexible cable on the DC controller PCB Error in connection of the flexible cable on the DC controller PCB (right side (1 pc.))
E604-0000Description: The image memory (SDRAM) is faulty/insufficient Memory capacity required for a model fails to be recognized.
E021-0000Description: Developing motor error Indicates that the signal indicates the motor rotates with the target speed is not sent to the port after passing more than 3 sec from the startup of the motor.
E592-8006Description: Puncher side registration sensor error Light receiving voltage at the time of non-light-emission is abnormal.