Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC3480 Top Searches

These results are ranked by popularity.

Error
E5F4-8002Description: Saddle rear side staple error The stitching HP sensor fails to be OFF after the stitcher motor (rear) rotates for 0.5 sec. or more.
E531-8001Description: Staple error Finisher-Y1, Saddle Finisher-Y2 The HP sensor fails to be OFF after the staple motor rotates for a specific period of time.
E540-8003Description: Stack tray up/down error Finisher-Z1 Encoder lock within 200ms fails to reach 10pulse during paper surface detection.
E717-0002Description: Communication error with the NE controller A break in the IPC, IPC communication fails to recover
E248-0002Description: Backup memory error Reader controller EEPROM writing error

Canon iRC3480 Common Errors

The most common error codes.

Error
E5F4-8002Description: Saddle rear side staple error The stitching HP sensor fails to be OFF after the stitcher motor (rear) rotates for 0.5 sec. or more.
E531-8001Description: Staple error Finisher-Y1, Saddle Finisher-Y2 The HP sensor fails to be OFF after the staple motor rotates for a specific period of time.
E540-8003Description: Stack tray up/down error Finisher-Z1 Encoder lock within 200ms fails to reach 10pulse during paper surface detection.
E717-0002Description: Communication error with the NE controller A break in the IPC, IPC communication fails to recover
E248-0002Description: Backup memory error Reader controller EEPROM writing error
E248-0002Description: Backup memory error Reader controller EEPROM writing error
E021-0000Description: Developing motor error Indicates that the signal indicates the motor rotates with the target speed is not sent to the port after passing more than 3 sec from the startup of the motor.
E531-8001Description: Staple error Finisher-Y1, Saddle Finisher-Y2 The HP sensor fails to be OFF after the staple motor rotates for a specific period of time.
E540-8003Description: Stack tray up/down error Finisher-Z1 Encoder lock within 200ms fails to reach 10pulse during paper surface detection.
E717-0002Description: Communication error with the NE controller A break in the IPC, IPC communication fails to recover