These results are ranked by popularity.
| Error | |
|---|---|
| E512 | Description: There is a fault in delivery. Finisher-M1 The delivery motor (M1) or the delivery clock sensor (S1) is faulty. The connector is disconnected. The delivery clock sensor signal is not detected when the delivery motor has been driven for 70 mm |
| E020-xxC0 | Description: There is a fault associated with the drum/developer. For the first 2 digits of detail code xx12 through xxD0, xx=01: Y xx=02: M xx=03: C xx=04: Bk The supply of toner for the toner container to the developing assembly is faulty. The develop |
| E804-0000 | Description: The power supply cooling fan is faulty. The DC controller tried to start it up, but the fan has been identified as being at rest for 5 sec continuously. |
| E002-0002 | Description: The rise in temperature of the fixing unit is inadequate. The output of the non-contact thermistor does not reach 60°C within 240 sec after it has reached 40°C. |
| E711-0001 | Description: There is a fault in IPC communication. Saddle Unit There is a fault in data communication. The ADF controller or the reader controller PCB is faulty. The connector between the reader unit and the DADF has poor contact. An error has been det |
The most common error codes.
| Error | |
|---|---|
| E512 | Description: There is a fault in delivery. Finisher-M1 The delivery motor (M1) or the delivery clock sensor (S1) is faulty. The connector is disconnected. The delivery clock sensor signal is not detected when the delivery motor has been driven for 70 mm |
| E020-xxC0 | Description: There is a fault associated with the drum/developer. For the first 2 digits of detail code xx12 through xxD0, xx=01: Y xx=02: M xx=03: C xx=04: Bk The supply of toner for the toner container to the developing assembly is faulty. The develop |
| E804-0000 | Description: The power supply cooling fan is faulty. The DC controller tried to start it up, but the fan has been identified as being at rest for 5 sec continuously. |
| E002-0002 | Description: The rise in temperature of the fixing unit is inadequate. The output of the non-contact thermistor does not reach 60°C within 240 sec after it has reached 40°C. |
| E711-0001 | Description: There is a fault in IPC communication. Saddle Unit There is a fault in data communication. The ADF controller or the reader controller PCB is faulty. The connector between the reader unit and the DADF has poor contact. An error has been det |
| E512 | Description: There is a fault in delivery. Finisher-M1 The delivery motor (M1) or the delivery clock sensor (S1) is faulty. The connector is disconnected. The delivery clock sensor signal is not detected when the delivery motor has been driven for 70 mm |
| E020-xxC0 | Description: There is a fault associated with the drum/developer. For the first 2 digits of detail code xx12 through xxD0, xx=01: Y xx=02: M xx=03: C xx=04: Bk The supply of toner for the toner container to the developing assembly is faulty. The develop |
| E804-0000 | Description: The power supply cooling fan is faulty. The DC controller tried to start it up, but the fan has been identified as being at rest for 5 sec continuously. |
| E002-0002 | Description: The rise in temperature of the fixing unit is inadequate. The output of the non-contact thermistor does not reach 60°C within 240 sec after it has reached 40°C. |
| E711-0001 | Description: There is a fault in IPC communication. Saddle Unit There is a fault in data communication. The ADF controller or the reader controller PCB is faulty. The connector between the reader unit and the DADF has poor contact. An error has been det |
