Canon iRC3180i Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC3180i Top Searches

These results are ranked by popularity.

Error
E020-XX11Description: Drum/Developer-related error XX=01:Y XX=02:M XX=03:C XX=04:K XX=00:Any color In INIT control of the initial setting, REF is less than 62.
E749-0001Description: Restart in accordance with a change of the product configuration The BootROM is replaced with a different type (when the PDL option is installed)
E590-0001Description: Puncher motor error The puncher HP sensor fails to be detected after the puncher motor is driven for 200ms.
E001-0001Description: Abnormality of the fixing unit High temperature of the end thermistor is detected. (Hardware) The hardware detects abnormal high temperature of the end thermistor (230 deg C or higher) for 400msec continuously.
E503-0002Description: Finisher internal communication error Finisher-P1 Communication error between the finisher and the saddle unit

Canon iRC3180i Common Errors

The most common error codes.

Error
E020-XX11Description: Drum/Developer-related error XX=01:Y XX=02:M XX=03:C XX=04:K XX=00:Any color In INIT control of the initial setting, REF is less than 62.
E749-0001Description: Restart in accordance with a change of the product configuration The BootROM is replaced with a different type (when the PDL option is installed)
E590-0001Description: Puncher motor error The puncher HP sensor fails to be detected after the puncher motor is driven for 200ms.
E001-0001Description: Abnormality of the fixing unit High temperature of the end thermistor is detected. (Hardware) The hardware detects abnormal high temperature of the end thermistor (230 deg C or higher) for 400msec continuously.
E503-0002Description: Finisher internal communication error Finisher-P1 Communication error between the finisher and the saddle unit
E020-XX11Description: Drum/Developer-related error XX=01:Y XX=02:M XX=03:C XX=04:K XX=00:Any color In INIT control of the initial setting, REF is less than 62.
E749-0001Description: Restart in accordance with a change of the product configuration The BootROM is replaced with a different type (when the PDL option is installed)
E590-0001Description: Puncher motor error The puncher HP sensor fails to be detected after the puncher motor is driven for 200ms.
E001-0001Description: Abnormality of the fixing unit High temperature of the end thermistor is detected. (Hardware) The hardware detects abnormal high temperature of the end thermistor (230 deg C or higher) for 400msec continuously.
E503-0002Description: Finisher internal communication error Finisher-P1 Communication error between the finisher and the saddle unit