Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC3180Ci Top Searches

These results are ranked by popularity.

Error
E537-0002Description: Front alignment error Finisher-P1 The HP sensor fails to be OFF within 1000ms after the front adjuster plate starts to move from its HP.
E002-0007Description: Insufficient temperature rise of the fixing unit The non-contact thermistor fails to reach 180 deg C within 180 sec after reaching 160 deg C.
E747Description: Main controller PCB error (Image processing ASIC or memory control/communication control ASIC)
E490-0001Description: Model error Feeder for other model is detected.
E530-0002Description: Rear alignment error Finisher-P1 The HP sensor fails to be OFF within 1000ms after the rear adjuster plate starts to move from its HP.

Canon iRC3180Ci Common Errors

The most common error codes.

Error
E537-0002Description: Front alignment error Finisher-P1 The HP sensor fails to be OFF within 1000ms after the front adjuster plate starts to move from its HP.
E002-0007Description: Insufficient temperature rise of the fixing unit The non-contact thermistor fails to reach 180 deg C within 180 sec after reaching 160 deg C.
E747Description: Main controller PCB error (Image processing ASIC or memory control/communication control ASIC)
E490-0001Description: Model error Feeder for other model is detected.
E530-0002Description: Rear alignment error Finisher-P1 The HP sensor fails to be OFF within 1000ms after the rear adjuster plate starts to move from its HP.
E537-0002Description: Front alignment error Finisher-P1 The HP sensor fails to be OFF within 1000ms after the front adjuster plate starts to move from its HP.
E002-0007Description: Insufficient temperature rise of the fixing unit The non-contact thermistor fails to reach 180 deg C within 180 sec after reaching 160 deg C.
E747Description: Main controller PCB error (Image processing ASIC or memory control/communication control ASIC)
E490-0001Description: Model error Feeder for other model is detected.
E530-0002Description: Rear alignment error Finisher-P1 The HP sensor fails to be OFF within 1000ms after the rear adjuster plate starts to move from its HP.