Canon iRC3180 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC3180 Top Searches

These results are ranked by popularity.

Error
E010-0001Description: Main motor error Lock of the motor fails to be detected 2 sec or more after the motor starts to operate.
E540-0003Description: Stack tray up/down error Finisher-P1 Encoder lock within 200ms fails to reach 10pulse during paper surface detection.
E531-0002Description: Staple error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4 The HP sensor fails to be ON after the staple motor rotates for a specific period of time.
E400-0002Description: Feeder communication error Reception status error
E717-0001Description: Communication error with the NE controller The NE controller connected before the power is turned off fails to be recognized at power-on.

Canon iRC3180 Common Errors

The most common error codes.

Error
E010-0001Description: Main motor error Lock of the motor fails to be detected 2 sec or more after the motor starts to operate.
E540-0003Description: Stack tray up/down error Finisher-P1 Encoder lock within 200ms fails to reach 10pulse during paper surface detection.
E531-0002Description: Staple error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4 The HP sensor fails to be ON after the staple motor rotates for a specific period of time.
E400-0002Description: Feeder communication error Reception status error
E717-0001Description: Communication error with the NE controller The NE controller connected before the power is turned off fails to be recognized at power-on.
E010-0001Description: Main motor error Lock of the motor fails to be detected 2 sec or more after the motor starts to operate.
E540-0003Description: Stack tray up/down error Finisher-P1 Encoder lock within 200ms fails to reach 10pulse during paper surface detection.
E531-0002Description: Staple error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4 The HP sensor fails to be ON after the staple motor rotates for a specific period of time.
E400-0002Description: Feeder communication error Reception status error
E717-0001Description: Communication error with the NE controller The NE controller connected before the power is turned off fails to be recognized at power-on.