Canon iRC3170i Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC3170i Top Searches

These results are ranked by popularity.

Error
E532-0002Description: Staple unit shift error Finisher-P1 The HP sensor fails to be OFF within 1000ms after the staple unit starts to move from its HP.
E505-0001Description: Finisher backup memory error Data stored in the backup memory is abnormal.
E730Description: PDL error
E100-0001Description: BD error Speed lock of the BD speed control fails to be executed 5 sec after the laser scanner motor starts to operate.
E5F5-0001Description: Saddle front side staple error The stitching HP sensor fails to be ON after the stitcher motor (front) rotates in the adverse direction for 0.5 sec. or more.

Canon iRC3170i Common Errors

The most common error codes.

Error
E532-0002Description: Staple unit shift error Finisher-P1 The HP sensor fails to be OFF within 1000ms after the staple unit starts to move from its HP.
E505-0001Description: Finisher backup memory error Data stored in the backup memory is abnormal.
E730Description: PDL error
E100-0001Description: BD error Speed lock of the BD speed control fails to be executed 5 sec after the laser scanner motor starts to operate.
E5F5-0001Description: Saddle front side staple error The stitching HP sensor fails to be ON after the stitcher motor (front) rotates in the adverse direction for 0.5 sec. or more.
E532-0002Description: Staple unit shift error Finisher-P1 The HP sensor fails to be OFF within 1000ms after the staple unit starts to move from its HP.
E505-0001Description: Finisher backup memory error Data stored in the backup memory is abnormal.
E730Description: PDL error
E100-0001Description: BD error Speed lock of the BD speed control fails to be executed 5 sec after the laser scanner motor starts to operate.
E5F5-0001Description: Saddle front side staple error The stitching HP sensor fails to be ON after the stitcher motor (front) rotates in the adverse direction for 0.5 sec. or more.