These results are ranked by popularity.
Error | |
---|---|
E503-0002 | Description: Finisher internal communication error Finisher-P1 Communication error between the finisher and the saddle unit |
E719-0011 | Description: Communication error with the coin vender/card reader The card reader connected before the power is turned off fails to be recognized at power-on. |
E070-0002 | Description: ITB HP detection error The next HP fails to be detected within the specific period of time after the HP of the ITB is detected. |
E5F4-0001 | Description: Saddle rear side staple error The stitching HP sensor fails to be ON after the stitcher motor (rear) rotates in the adverse direction for 0.5 sec. or more. |
E013-0000 | Description: ITB waste toner full error Jobs for 500 images (on a small-size paper basis) have been executed after the ITB waste toner full sensor is turned ON. |
The most common error codes.
Error | |
---|---|
E503-0002 | Description: Finisher internal communication error Finisher-P1 Communication error between the finisher and the saddle unit |
E719-0011 | Description: Communication error with the coin vender/card reader The card reader connected before the power is turned off fails to be recognized at power-on. |
E070-0002 | Description: ITB HP detection error The next HP fails to be detected within the specific period of time after the HP of the ITB is detected. |
E5F4-0001 | Description: Saddle rear side staple error The stitching HP sensor fails to be ON after the stitcher motor (rear) rotates in the adverse direction for 0.5 sec. or more. |
E013-0000 | Description: ITB waste toner full error Jobs for 500 images (on a small-size paper basis) have been executed after the ITB waste toner full sensor is turned ON. |
E503-0002 | Description: Finisher internal communication error Finisher-P1 Communication error between the finisher and the saddle unit |
E719-0011 | Description: Communication error with the coin vender/card reader The card reader connected before the power is turned off fails to be recognized at power-on. |
E070-0002 | Description: ITB HP detection error The next HP fails to be detected within the specific period of time after the HP of the ITB is detected. |
E5F4-0001 | Description: Saddle rear side staple error The stitching HP sensor fails to be ON after the stitcher motor (rear) rotates in the adverse direction for 0.5 sec. or more. |
E013-0000 | Description: ITB waste toner full error Jobs for 500 images (on a small-size paper basis) have been executed after the ITB waste toner full sensor is turned ON. |