Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC3170 Top Searches

These results are ranked by popularity.

Error
E045-0001Description: OHP sensor error The sampling data measured during initial multiple rotations is lower than the specific level.
E503-0002Description: Finisher internal communication error Finisher-P1 Communication error between the finisher and the saddle unit
E003-0001Description: Low temperature of the fixing unit after standby Abnormal low temperature (130 deg C or lower) of the non-contact thermistor is detected for 3.5 sec continuously after standby.
E590-0001Description: Puncher motor error The puncher HP sensor fails to be detected after the puncher motor is driven for 200ms.
E5F9-0001Description: Saddle switch error Open of the inlet cover is detected for 1 sec. or more after the host machine starts initial rotation/printing while the following sensors detect their covers closed. - Inlet cover sensor (PI9S) - Front cover open/close

Canon iRC3170 Common Errors

The most common error codes.

Error
E045-0001Description: OHP sensor error The sampling data measured during initial multiple rotations is lower than the specific level.
E503-0002Description: Finisher internal communication error Finisher-P1 Communication error between the finisher and the saddle unit
E003-0001Description: Low temperature of the fixing unit after standby Abnormal low temperature (130 deg C or lower) of the non-contact thermistor is detected for 3.5 sec continuously after standby.
E590-0001Description: Puncher motor error The puncher HP sensor fails to be detected after the puncher motor is driven for 200ms.
E5F9-0001Description: Saddle switch error Open of the inlet cover is detected for 1 sec. or more after the host machine starts initial rotation/printing while the following sensors detect their covers closed. - Inlet cover sensor (PI9S) - Front cover open/close
E045-0001Description: OHP sensor error The sampling data measured during initial multiple rotations is lower than the specific level.
E503-0002Description: Finisher internal communication error Finisher-P1 Communication error between the finisher and the saddle unit
E003-0001Description: Low temperature of the fixing unit after standby Abnormal low temperature (130 deg C or lower) of the non-contact thermistor is detected for 3.5 sec continuously after standby.
E590-0001Description: Puncher motor error The puncher HP sensor fails to be detected after the puncher motor is driven for 200ms.
E5F9-0001Description: Saddle switch error Open of the inlet cover is detected for 1 sec. or more after the host machine starts initial rotation/printing while the following sensors detect their covers closed. - Inlet cover sensor (PI9S) - Front cover open/close