These results are ranked by popularity.
Error | |
---|---|
E531-0002 | Description: Staple error Finisher-P1 The HP sensor fails to be OFF within 500ms after the staple motor starts to drive. |
E351-0000 | Description: Main controller PCB error Communication error of the main controller PCB occurs at start-up. |
E712-0001 | Description: Communication error between the ADF and the reader Communication between the reader and the ADF stops, and the communication cannot recover for 5 sec. or more. |
E026-XX01 | Description: Toner empty error XX=01:Y XX=02:M XX=03:C XX=04:K After toner runs out, toner density fails to go back to normal even if toner replacement and toner recovery have been performed 5 times or more in succession. |
E5F1-0001 | Description: Saddle paper folder error ON. The number of detection pulses for the paper folder motor clock sensor is below the specific level. |
The most common error codes.
Error | |
---|---|
E531-0002 | Description: Staple error Finisher-P1 The HP sensor fails to be OFF within 500ms after the staple motor starts to drive. |
E351-0000 | Description: Main controller PCB error Communication error of the main controller PCB occurs at start-up. |
E712-0001 | Description: Communication error between the ADF and the reader Communication between the reader and the ADF stops, and the communication cannot recover for 5 sec. or more. |
E026-XX01 | Description: Toner empty error XX=01:Y XX=02:M XX=03:C XX=04:K After toner runs out, toner density fails to go back to normal even if toner replacement and toner recovery have been performed 5 times or more in succession. |
E5F1-0001 | Description: Saddle paper folder error ON. The number of detection pulses for the paper folder motor clock sensor is below the specific level. |
E531-0002 | Description: Staple error Finisher-P1 The HP sensor fails to be OFF within 500ms after the staple motor starts to drive. |
E351-0000 | Description: Main controller PCB error Communication error of the main controller PCB occurs at start-up. |
E712-0001 | Description: Communication error between the ADF and the reader Communication between the reader and the ADF stops, and the communication cannot recover for 5 sec. or more. |
E026-XX01 | Description: Toner empty error XX=01:Y XX=02:M XX=03:C XX=04:K After toner runs out, toner density fails to go back to normal even if toner replacement and toner recovery have been performed 5 times or more in succession. |
E5F1-0001 | Description: Saddle paper folder error ON. The number of detection pulses for the paper folder motor clock sensor is below the specific level. |