Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC3100N Top Searches

These results are ranked by popularity.

Error
E592-0007Description: Puncher side registration sensor error Light receiving voltage at the time of light emission is abnormal.
E514-0002Description: End assist motor error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4 The HP sensor fails to be ON after the end assist motor rotates for a specific period of time.
E014-0002Description: Fixing motor error After rotation of the motor becomes stable, the motor lock fails (i.e., the motor becomes unstable) for 500msec or more.
E5F6-0003Description: Saddle paper push-on error The number of detection pulses for the paper pressure plate motor clock sensor is below the specific level.
E532-0001Description: Staple unit shift error Finisher-P1 The HP sensor fails to be ON within 11000ms after the staple unit starts to move to the stapling HP.

Canon iRC3100N Common Errors

The most common error codes.

Error
E592-0007Description: Puncher side registration sensor error Light receiving voltage at the time of light emission is abnormal.
E514-0002Description: End assist motor error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4 The HP sensor fails to be ON after the end assist motor rotates for a specific period of time.
E014-0002Description: Fixing motor error After rotation of the motor becomes stable, the motor lock fails (i.e., the motor becomes unstable) for 500msec or more.
E5F6-0003Description: Saddle paper push-on error The number of detection pulses for the paper pressure plate motor clock sensor is below the specific level.
E532-0001Description: Staple unit shift error Finisher-P1 The HP sensor fails to be ON within 11000ms after the staple unit starts to move to the stapling HP.
E592-0007Description: Puncher side registration sensor error Light receiving voltage at the time of light emission is abnormal.
E514-0002Description: End assist motor error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4 The HP sensor fails to be ON after the end assist motor rotates for a specific period of time.
E014-0002Description: Fixing motor error After rotation of the motor becomes stable, the motor lock fails (i.e., the motor becomes unstable) for 500msec or more.
E5F6-0003Description: Saddle paper push-on error The number of detection pulses for the paper pressure plate motor clock sensor is below the specific level.
E532-0001Description: Staple unit shift error Finisher-P1 The HP sensor fails to be ON within 11000ms after the staple unit starts to move to the stapling HP.