These results are ranked by popularity.
Error | |
---|---|
E110-0001 | Description: Operation error of the laser scanner motor Speed lock of the FG speed control fails to be executed 5 sec after the laser scanner motor starts to operate. |
E5F6-0003 | Description: Saddle paper push-on error The number of detection pulses for the paper pressure plate motor clock sensor is below the specific level. |
E020-XX13 | Description: Drum/Developer-related error XX=01:Y XX=02:M XX=03:C XX=04:K XX=00:Any color In INIT control of the initial setting, REF is 960 or more. |
E584-0001 | Description: Shutter unit error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4 The shutter open sensor fails to be OFF (The shutter cannot be closed). |
E001-0003 | Description: Abnormality of the fixing unit High temperature of the end thermistor (Software) Abnormal high temperature (220 deg C or more) of the end thermistor is detected for 500ms continuously. |
The most common error codes.
Error | |
---|---|
E110-0001 | Description: Operation error of the laser scanner motor Speed lock of the FG speed control fails to be executed 5 sec after the laser scanner motor starts to operate. |
E5F6-0003 | Description: Saddle paper push-on error The number of detection pulses for the paper pressure plate motor clock sensor is below the specific level. |
E020-XX13 | Description: Drum/Developer-related error XX=01:Y XX=02:M XX=03:C XX=04:K XX=00:Any color In INIT control of the initial setting, REF is 960 or more. |
E584-0001 | Description: Shutter unit error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4 The shutter open sensor fails to be OFF (The shutter cannot be closed). |
E001-0003 | Description: Abnormality of the fixing unit High temperature of the end thermistor (Software) Abnormal high temperature (220 deg C or more) of the end thermistor is detected for 500ms continuously. |
E110-0001 | Description: Operation error of the laser scanner motor Speed lock of the FG speed control fails to be executed 5 sec after the laser scanner motor starts to operate. |
E5F6-0003 | Description: Saddle paper push-on error The number of detection pulses for the paper pressure plate motor clock sensor is below the specific level. |
E020-XX13 | Description: Drum/Developer-related error XX=01:Y XX=02:M XX=03:C XX=04:K XX=00:Any color In INIT control of the initial setting, REF is 960 or more. |
E584-0001 | Description: Shutter unit error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4 The shutter open sensor fails to be OFF (The shutter cannot be closed). |
E001-0003 | Description: Abnormality of the fixing unit High temperature of the end thermistor (Software) Abnormal high temperature (220 deg C or more) of the end thermistor is detected for 500ms continuously. |