Canon iRC2880 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC2880 Top Searches

These results are ranked by popularity.

Error
E537-8001Description: Rear alignment error Finisher-Y1, Saddle Finisher-Y2 The HP sensor fails to be OFF after the swing motor rotates for a specific period of time.
E530-8001Description: Front alignment error Finisher-Y1, Saddle Finisher-Y2 The HP sensor fails to be OFF after the front jog motor rotates for a specific period of time.
E745Description: Token ring board error
E244-0000Description: Error in connection of the flexible cable on the DC controller PCB Error in connection of the flexible cable on the DC controller PCB (right side (1 pc.))
E604-0000Description: The image memory (SDRAM) is faulty/insufficient Memory capacity required for a model fails to be recognized.

Canon iRC2880 Common Errors

The most common error codes.

Error
E537-8001Description: Rear alignment error Finisher-Y1, Saddle Finisher-Y2 The HP sensor fails to be OFF after the swing motor rotates for a specific period of time.
E530-8001Description: Front alignment error Finisher-Y1, Saddle Finisher-Y2 The HP sensor fails to be OFF after the front jog motor rotates for a specific period of time.
E745Description: Token ring board error
E244-0000Description: Error in connection of the flexible cable on the DC controller PCB Error in connection of the flexible cable on the DC controller PCB (right side (1 pc.))
E604-0000Description: The image memory (SDRAM) is faulty/insufficient Memory capacity required for a model fails to be recognized.
E537-8001Description: Rear alignment error Finisher-Y1, Saddle Finisher-Y2 The HP sensor fails to be OFF after the swing motor rotates for a specific period of time.
E530-8001Description: Front alignment error Finisher-Y1, Saddle Finisher-Y2 The HP sensor fails to be OFF after the front jog motor rotates for a specific period of time.
E745Description: Token ring board error
E244-0000Description: Error in connection of the flexible cable on the DC controller PCB Error in connection of the flexible cable on the DC controller PCB (right side (1 pc.))
E604-0000Description: The image memory (SDRAM) is faulty/insufficient Memory capacity required for a model fails to be recognized.