Canon iRC2580 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC2580 Top Searches

These results are ranked by popularity.

Error
E5F1-0001Description: Saddle paper folder error ON. The number of detection pulses for the paper folder motor clock sensor is below the specific level.
E006-0000Description: Connection error of the fixing unit The hardware detects non-attachment of the fixing unit for 400msec continuously. A break in the fixing unit presence/ absence signal (FUSER_CNCTX_N) / Disconnection of the connector (The connectors are pl
E540-0002Description: Upper tray up/down error Area is abnormal.
E531-0002Description: Staple error Finisher-P1 The HP sensor fails to be OFF within 500ms after the staple motor starts to drive.
E351-0000Description: Main controller PCB error Communication error of the main controller PCB occurs at start-up.

Canon iRC2580 Common Errors

The most common error codes.

Error
E5F1-0001Description: Saddle paper folder error ON. The number of detection pulses for the paper folder motor clock sensor is below the specific level.
E006-0000Description: Connection error of the fixing unit The hardware detects non-attachment of the fixing unit for 400msec continuously. A break in the fixing unit presence/ absence signal (FUSER_CNCTX_N) / Disconnection of the connector (The connectors are pl
E540-0002Description: Upper tray up/down error Area is abnormal.
E531-0002Description: Staple error Finisher-P1 The HP sensor fails to be OFF within 500ms after the staple motor starts to drive.
E351-0000Description: Main controller PCB error Communication error of the main controller PCB occurs at start-up.
E5F1-0001Description: Saddle paper folder error ON. The number of detection pulses for the paper folder motor clock sensor is below the specific level.
E006-0000Description: Connection error of the fixing unit The hardware detects non-attachment of the fixing unit for 400msec continuously. A break in the fixing unit presence/ absence signal (FUSER_CNCTX_N) / Disconnection of the connector (The connectors are pl
E540-0002Description: Upper tray up/down error Area is abnormal.
E531-0002Description: Staple error Finisher-P1 The HP sensor fails to be OFF within 500ms after the staple motor starts to drive.
E351-0000Description: Main controller PCB error Communication error of the main controller PCB occurs at start-up.