These results are ranked by popularity.
Error | |
---|---|
E531-0002 | Description: Staple error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4 The HP sensor fails to be ON after the staple motor rotates for a specific period of time. |
E400-0002 | Description: Feeder communication error Reception status error |
E717-0001 | Description: Communication error with the NE controller The NE controller connected before the power is turned off fails to be recognized at power-on. |
E045-0001 | Description: OHP sensor error The sampling data measured during initial multiple rotations is lower than the specific level. |
E5F2-0001 | Description: Saddle guide error The guide HP sensor fails to be ON after the guide motor is driven for 0.455 sec. |
The most common error codes.
Error | |
---|---|
E531-0002 | Description: Staple error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4 The HP sensor fails to be ON after the staple motor rotates for a specific period of time. |
E400-0002 | Description: Feeder communication error Reception status error |
E717-0001 | Description: Communication error with the NE controller The NE controller connected before the power is turned off fails to be recognized at power-on. |
E045-0001 | Description: OHP sensor error The sampling data measured during initial multiple rotations is lower than the specific level. |
E5F2-0001 | Description: Saddle guide error The guide HP sensor fails to be ON after the guide motor is driven for 0.455 sec. |
E531-0002 | Description: Staple error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4 The HP sensor fails to be ON after the staple motor rotates for a specific period of time. |
E400-0002 | Description: Feeder communication error Reception status error |
E717-0001 | Description: Communication error with the NE controller The NE controller connected before the power is turned off fails to be recognized at power-on. |
E045-0001 | Description: OHP sensor error The sampling data measured during initial multiple rotations is lower than the specific level. |
E5F2-0001 | Description: Saddle guide error The guide HP sensor fails to be ON after the guide motor is driven for 0.455 sec. |