Canon iRC2550i Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC2550i Top Searches

These results are ranked by popularity.

Error
E001-0001Description: Abnormality high temperature error of the fixing unit Detect high temperature by the sub thermistor (software). Software detects that the temperature detected by the sub thermistor is abnormally high (above 260 deg C) for 500 ms continuousl
E745Description: Token ring board error
E248-0000Description: Backup memory error Check error of the SRAM PCB (at start up)
E537-8002Description: Rear alignment error Finisher-Y1, Saddle Finisher-Y2 The HP sensor fails to be ON after the swing motor rotates for a specific period of time.
E505-0004Description: Finisher backup memory error Finisher controller EEPROM writing timeout error

Canon iRC2550i Common Errors

The most common error codes.

Error
E001-0001Description: Abnormality high temperature error of the fixing unit Detect high temperature by the sub thermistor (software). Software detects that the temperature detected by the sub thermistor is abnormally high (above 260 deg C) for 500 ms continuousl
E745Description: Token ring board error
E248-0000Description: Backup memory error Check error of the SRAM PCB (at start up)
E537-8002Description: Rear alignment error Finisher-Y1, Saddle Finisher-Y2 The HP sensor fails to be ON after the swing motor rotates for a specific period of time.
E505-0004Description: Finisher backup memory error Finisher controller EEPROM writing timeout error
E001-0001Description: Abnormality high temperature error of the fixing unit Detect high temperature by the sub thermistor (software). Software detects that the temperature detected by the sub thermistor is abnormally high (above 260 deg C) for 500 ms continuousl
E745Description: Token ring board error
E248-0000Description: Backup memory error Check error of the SRAM PCB (at start up)
E537-8002Description: Rear alignment error Finisher-Y1, Saddle Finisher-Y2 The HP sensor fails to be ON after the swing motor rotates for a specific period of time.
E505-0004Description: Finisher backup memory error Finisher controller EEPROM writing timeout error