Canon iRC2100S Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC2100S Top Searches

These results are ranked by popularity.

Error
E805-0006Description: The kit drive cooling fan (FM10) is found to have locked.
E5F6-0005Description: The paper push-on plate leading edge position sensor does not turn on even when the paper push-on plate motor has been driven for 0.3 sec or more after the paper push-on plate home position sensor is turned off.
E530Description: After the motor drive signal has been generated, the input signal of the guide bar HP sensor (PI3) does not change within 200 msec.
E043Description: The PLL lock signal (DMPLK) remains ‘1’ for 2 sec or more after the deck main motor drive signal is generated.
E540-0001Description: The ascent operation does not end 15 sec after the tray lift motor is started. The tray home position cannot be detected even when the tray lift motor has been driven for 15 sec.

Canon iRC2100S Common Errors

The most common error codes.

Error
E805-0006Description: The kit drive cooling fan (FM10) is found to have locked.
E5F6-0005Description: The paper push-on plate leading edge position sensor does not turn on even when the paper push-on plate motor has been driven for 0.3 sec or more after the paper push-on plate home position sensor is turned off.
E530Description: After the motor drive signal has been generated, the input signal of the guide bar HP sensor (PI3) does not change within 200 msec.
E043Description: The PLL lock signal (DMPLK) remains ‘1’ for 2 sec or more after the deck main motor drive signal is generated.
E540-0001Description: The ascent operation does not end 15 sec after the tray lift motor is started. The tray home position cannot be detected even when the tray lift motor has been driven for 15 sec.
E805-0006Description: The kit drive cooling fan (FM10) is found to have locked.
E5F6-0005Description: The paper push-on plate leading edge position sensor does not turn on even when the paper push-on plate motor has been driven for 0.3 sec or more after the paper push-on plate home position sensor is turned off.
E530Description: After the motor drive signal has been generated, the input signal of the guide bar HP sensor (PI3) does not change within 200 msec.
E043Description: The PLL lock signal (DMPLK) remains ‘1’ for 2 sec or more after the deck main motor drive signal is generated.
E540-0001Description: The ascent operation does not end 15 sec after the tray lift motor is started. The tray home position cannot be detected even when the tray lift motor has been driven for 15 sec.