These results are ranked by popularity.
Error | |
---|---|
E805-0004 | Description: The power supply cooling fan (FM6) is found to have locked. |
E5F6-0003 | Description: When the paper push-on plate is moving from the leading edge to the home position, the paper push-on plate leading edge sensor does not turn on even when the paper push-on plate motor has been driven for 1.0 sec or more. |
E512-0002 | Description: During feeding, clock pulses are absent for a period equivalent of 200 mm. |
E041-0001 | Description: The fault was detected while the lifter was moving up. The deck lifter position sensor (PS104) does not detect the lifter within 60 sec after the deck lifter UP signal is generated. The output of the deck paper sensor (PS107) is ‘0’ when the |
E625 | Description: An error has occurred in the editor RAM. |
The most common error codes.
Error | |
---|---|
E805-0004 | Description: The power supply cooling fan (FM6) is found to have locked. |
E5F6-0003 | Description: When the paper push-on plate is moving from the leading edge to the home position, the paper push-on plate leading edge sensor does not turn on even when the paper push-on plate motor has been driven for 1.0 sec or more. |
E512-0002 | Description: During feeding, clock pulses are absent for a period equivalent of 200 mm. |
E041-0001 | Description: The fault was detected while the lifter was moving up. The deck lifter position sensor (PS104) does not detect the lifter within 60 sec after the deck lifter UP signal is generated. The output of the deck paper sensor (PS107) is ‘0’ when the |
E625 | Description: An error has occurred in the editor RAM. |
E805-0004 | Description: The power supply cooling fan (FM6) is found to have locked. |
E5F6-0003 | Description: When the paper push-on plate is moving from the leading edge to the home position, the paper push-on plate leading edge sensor does not turn on even when the paper push-on plate motor has been driven for 1.0 sec or more. |
E512-0002 | Description: During feeding, clock pulses are absent for a period equivalent of 200 mm. |
E041-0001 | Description: The fault was detected while the lifter was moving up. The deck lifter position sensor (PS104) does not detect the lifter within 60 sec after the deck lifter UP signal is generated. The output of the deck paper sensor (PS107) is ‘0’ when the |
E625 | Description: An error has occurred in the editor RAM. |