These results are ranked by popularity.
Error | |
---|---|
E711-0003 | Description: The connector is not connected properly. The remote diagnostic device PCB is faulty. The copy data controller PCB is faulty. The ADF controller PCB is faulty. The ADF controller PCB is faulty. The finisher controller PCB is faulty. Data has |
E248-0002 | Description: The EEPROM on the reader controller PCB is faulty. The reader controller PCB is faulty. When data is written into EEPROM, the data written and the data read do not match. |
E5F0-0001 | Description: The paper positioning plate home position sensor (PI7S) is faulty. The paper positioning plate motor (M4S) is faulty. The saddle stitcher controller PCB is faulty. The paper positioning plate home position sensor does not turn on when the p |
E744-0002 | Description: The boot ROM and the firmware have a mismatch of model or type: at time of start-up, the language file is found to be too large. |
E013-0000 | Description: The waste toner feedscrew is faulty. The water toner clock sensor (MSW2) is faulty. The DC controller PCB is faulty. The rotation of the waste toner feedscrew goes out of order, and the switch (MSW2) is pressed multiple times during a speci |
The most common error codes.
Error | |
---|---|
E711-0003 | Description: The connector is not connected properly. The remote diagnostic device PCB is faulty. The copy data controller PCB is faulty. The ADF controller PCB is faulty. The ADF controller PCB is faulty. The finisher controller PCB is faulty. Data has |
E248-0002 | Description: The EEPROM on the reader controller PCB is faulty. The reader controller PCB is faulty. When data is written into EEPROM, the data written and the data read do not match. |
E5F0-0001 | Description: The paper positioning plate home position sensor (PI7S) is faulty. The paper positioning plate motor (M4S) is faulty. The saddle stitcher controller PCB is faulty. The paper positioning plate home position sensor does not turn on when the p |
E744-0002 | Description: The boot ROM and the firmware have a mismatch of model or type: at time of start-up, the language file is found to be too large. |
E013-0000 | Description: The waste toner feedscrew is faulty. The water toner clock sensor (MSW2) is faulty. The DC controller PCB is faulty. The rotation of the waste toner feedscrew goes out of order, and the switch (MSW2) is pressed multiple times during a speci |
E711-0003 | Description: The connector is not connected properly. The remote diagnostic device PCB is faulty. The copy data controller PCB is faulty. The ADF controller PCB is faulty. The ADF controller PCB is faulty. The finisher controller PCB is faulty. Data has |
E248-0002 | Description: The EEPROM on the reader controller PCB is faulty. The reader controller PCB is faulty. When data is written into EEPROM, the data written and the data read do not match. |
E5F0-0001 | Description: The paper positioning plate home position sensor (PI7S) is faulty. The paper positioning plate motor (M4S) is faulty. The saddle stitcher controller PCB is faulty. The paper positioning plate home position sensor does not turn on when the p |
E744-0002 | Description: The boot ROM and the firmware have a mismatch of model or type: at time of start-up, the language file is found to be too large. |
E013-0000 | Description: The waste toner feedscrew is faulty. The water toner clock sensor (MSW2) is faulty. The DC controller PCB is faulty. The rotation of the waste toner feedscrew goes out of order, and the switch (MSW2) is pressed multiple times during a speci |