Canon iR6870Ci Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR6870Ci Top Searches

These results are ranked by popularity.

Error
E020-xx92Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction The value delta D obtained from the result (Sig D) of computation based on the reading of the patch during patch detection is -5.0% or more 3
E592-8003Description: There is an error in the punch horizontal registration sensor. (punch unit) There is an error in the light-receiving voltage with emission of light. (horizontal registration sensor 1)
E004-0006Description: There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. The
E503-0003Description: There is an error in the communication within the finisher (finisher R1/R2). finisher-to-punch unit communication error
E000-0021Description: At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or t

Canon iR6870Ci Common Errors

The most common error codes.

Error
E020-xx92Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction The value delta D obtained from the result (Sig D) of computation based on the reading of the patch during patch detection is -5.0% or more 3
E592-8003Description: There is an error in the punch horizontal registration sensor. (punch unit) There is an error in the light-receiving voltage with emission of light. (horizontal registration sensor 1)
E004-0006Description: There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. The
E503-0003Description: There is an error in the communication within the finisher (finisher R1/R2). finisher-to-punch unit communication error
E000-0021Description: At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or t
E020-xx92Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction The value delta D obtained from the result (Sig D) of computation based on the reading of the patch during patch detection is -5.0% or more 3
E592-8003Description: There is an error in the punch horizontal registration sensor. (punch unit) There is an error in the light-receiving voltage with emission of light. (horizontal registration sensor 1)
E004-0006Description: There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. The
E503-0003Description: There is an error in the communication within the finisher (finisher R1/R2). finisher-to-punch unit communication error
E000-0021Description: At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or t