Canon iR6020i Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR6020i Top Searches

These results are ranked by popularity.

Error
E204-0001Description: The ADF controller PCB is faulty. The reader controller PCB is faulty. During printing, the image leading edge signal does not arrive from the ADF.
E505-0001Description: The EEPROM is faulty. The finisher controller PCB is faulty. The puncher driver PCB is faulty. When the power switch is turned on, the check sum of the EEPROM on the finisher controller PCB is found to have an error.
E5F9-0003Description: The inlet cover switch (MS1S) is faulty. The front cover switch (MS2S) is faulty. The delivery cover switch (MS3S) is faulty. The saddle stitch controller PCB is faulty. When the inlet cover, front cover, and delivery cover are found to be
E302-0002Description: The CCD/AP PCB is faulty. The wiring is faulty (short circuit, open circuit). The reader controller PCB is faulty. In stream reading, the edge white accumulation (processing) does not end after a period of 10 secs.
E535-0002Description: The swing motor clock sensor (PI20) is faulty. The swing guide open sensor (PI18) is faulty. The safety area switch (MS3) is faulty. The swing guide closed detecting switch 2 (MS6) is faulty. The swing motor (M7) is faulty. The finisher cont

Canon iR6020i Common Errors

The most common error codes.

Error
E204-0001Description: The ADF controller PCB is faulty. The reader controller PCB is faulty. During printing, the image leading edge signal does not arrive from the ADF.
E505-0001Description: The EEPROM is faulty. The finisher controller PCB is faulty. The puncher driver PCB is faulty. When the power switch is turned on, the check sum of the EEPROM on the finisher controller PCB is found to have an error.
E5F9-0003Description: The inlet cover switch (MS1S) is faulty. The front cover switch (MS2S) is faulty. The delivery cover switch (MS3S) is faulty. The saddle stitch controller PCB is faulty. When the inlet cover, front cover, and delivery cover are found to be
E302-0002Description: The CCD/AP PCB is faulty. The wiring is faulty (short circuit, open circuit). The reader controller PCB is faulty. In stream reading, the edge white accumulation (processing) does not end after a period of 10 secs.
E535-0002Description: The swing motor clock sensor (PI20) is faulty. The swing guide open sensor (PI18) is faulty. The safety area switch (MS3) is faulty. The swing guide closed detecting switch 2 (MS6) is faulty. The swing motor (M7) is faulty. The finisher cont
E204-0001Description: The ADF controller PCB is faulty. The reader controller PCB is faulty. During printing, the image leading edge signal does not arrive from the ADF.
E505-0001Description: The EEPROM is faulty. The finisher controller PCB is faulty. The puncher driver PCB is faulty. When the power switch is turned on, the check sum of the EEPROM on the finisher controller PCB is found to have an error.
E5F9-0003Description: The inlet cover switch (MS1S) is faulty. The front cover switch (MS2S) is faulty. The delivery cover switch (MS3S) is faulty. The saddle stitch controller PCB is faulty. When the inlet cover, front cover, and delivery cover are found to be
E302-0002Description: The CCD/AP PCB is faulty. The wiring is faulty (short circuit, open circuit). The reader controller PCB is faulty. In stream reading, the edge white accumulation (processing) does not end after a period of 10 secs.
E535-0002Description: The swing motor clock sensor (PI20) is faulty. The swing guide open sensor (PI18) is faulty. The safety area switch (MS3) is faulty. The swing guide closed detecting switch 2 (MS6) is faulty. The swing motor (M7) is faulty. The finisher cont