Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR6000D Top Searches

These results are ranked by popularity.

Error
E602-0002Description: The wiring is faulty (short circuit, open circuit). The hard disk drive is faulty. The main controller PCB is faulty. A data read error (from the hard disk) was detected when the hard disk was started from the boot ROM.
E202-0001Description: The scanner HP sensor (PS39) is faulty. The scanner motor (M3) is faulty. The reader controller PCB is faulty. The scanner HP sensor does not turn off even when the scanner has been moved 40 mm forward after the main power switch has been t
E535-0001Description: The swing motor clock sensor (PI20) is faulty. The swing guide open sensor (PI18) is faulty. The safety area switch (MS3) is faulty. The swing guide closed detecting switch 2 (MS6) is faulty. The swing motor (M7) is faulty. The finisher cont
E000-000Description: The main thermistor (TH1) has poor contact or an open circuit. The thermal switch (TP1) has an open circuit. The fixing heater has an open circuit. The AC driver is faulty. The DC controller PCB is faulty. After the main power switch is tur
E5F0-0002Description: The paper positioning plate home position sensor (PI7S) is faulty. The paper positioning plate motor (M4S) is faulty. The saddle stitcher controller PCB is faulty. The paper positioning plate home position sensor does not turn off 1 sec aft

Canon iR6000D Common Errors

The most common error codes.

Error
E602-0002Description: The wiring is faulty (short circuit, open circuit). The hard disk drive is faulty. The main controller PCB is faulty. A data read error (from the hard disk) was detected when the hard disk was started from the boot ROM.
E202-0001Description: The scanner HP sensor (PS39) is faulty. The scanner motor (M3) is faulty. The reader controller PCB is faulty. The scanner HP sensor does not turn off even when the scanner has been moved 40 mm forward after the main power switch has been t
E535-0001Description: The swing motor clock sensor (PI20) is faulty. The swing guide open sensor (PI18) is faulty. The safety area switch (MS3) is faulty. The swing guide closed detecting switch 2 (MS6) is faulty. The swing motor (M7) is faulty. The finisher cont
E000-000Description: The main thermistor (TH1) has poor contact or an open circuit. The thermal switch (TP1) has an open circuit. The fixing heater has an open circuit. The AC driver is faulty. The DC controller PCB is faulty. After the main power switch is tur
E5F0-0002Description: The paper positioning plate home position sensor (PI7S) is faulty. The paper positioning plate motor (M4S) is faulty. The saddle stitcher controller PCB is faulty. The paper positioning plate home position sensor does not turn off 1 sec aft
E202-0001Description: The scanner HP sensor (PS39) is faulty. The scanner motor (M3) is faulty. The reader controller PCB is faulty. The scanner HP sensor does not turn off even when the scanner has been moved 40 mm forward after the main power switch has been t
E535-0001Description: The swing motor clock sensor (PI20) is faulty. The swing guide open sensor (PI18) is faulty. The safety area switch (MS3) is faulty. The swing guide closed detecting switch 2 (MS6) is faulty. The swing motor (M7) is faulty. The finisher cont
E602-0002Description: The wiring is faulty (short circuit, open circuit). The hard disk drive is faulty. The main controller PCB is faulty. A data read error (from the hard disk) was detected when the hard disk was started from the boot ROM.
E000-000Description: The main thermistor (TH1) has poor contact or an open circuit. The thermal switch (TP1) has an open circuit. The fixing heater has an open circuit. The AC driver is faulty. The DC controller PCB is faulty. After the main power switch is tur
E315-0010Description: Main controller PCB, Hard disk drive When a start command is sent to the compression/extension element of the main controller at time of decoding, an end interrupt does not occur after 4 sec.