These results are ranked by popularity.
Error | |
---|---|
E5F1-0001 | Description: There is an error in saddle paper folding. The number of detection pulses of the paper folding motor clock sensor is lower than specified. The paper folding home position sensor or the paper folding motor clock sensor (P14S) is faulty. |
E020-xxA3 | Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For ATR control, the Ref value is 960 or higher. The ATR sensor is damaged or has an open circuit. The connector has poor contact. |
E719-0012 | Description: error in communication with coin vendor/card reader There is an IPC cable open circuit or an IPC communication error in relation to the card reader that cannot be reset. |
E820-0002 | Description: There is an error in the process unit cooling fan. There is an error in the process unit fan. |
E350-0001 | Description: Fault in the soft ID PCB/function An error has occurred in the course of full data read operation on the soft ID PCB. |
The most common error codes.
Error | |
---|---|
E5F1-0001 | Description: There is an error in saddle paper folding. The number of detection pulses of the paper folding motor clock sensor is lower than specified. The paper folding home position sensor or the paper folding motor clock sensor (P14S) is faulty. |
E020-xxA3 | Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For ATR control, the Ref value is 960 or higher. The ATR sensor is damaged or has an open circuit. The connector has poor contact. |
E719-0012 | Description: error in communication with coin vendor/card reader There is an IPC cable open circuit or an IPC communication error in relation to the card reader that cannot be reset. |
E820-0002 | Description: There is an error in the process unit cooling fan. There is an error in the process unit fan. |
E350-0001 | Description: Fault in the soft ID PCB/function An error has occurred in the course of full data read operation on the soft ID PCB. |
E5F1-0001 | Description: There is an error in saddle paper folding. The number of detection pulses of the paper folding motor clock sensor is lower than specified. The paper folding home position sensor or the paper folding motor clock sensor (P14S) is faulty. |
E000-0021 | Description: At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or t |
E719-0012 | Description: error in communication with coin vendor/card reader There is an IPC cable open circuit or an IPC communication error in relation to the card reader that cannot be reset. |
E820-0002 | Description: There is an error in the process unit cooling fan. There is an error in the process unit fan. |
E350-0001 | Description: Fault in the soft ID PCB/function An error has occurred in the course of full data read operation on the soft ID PCB. |