Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR5020i Top Searches

These results are ranked by popularity.

Error
E602-0002Description: The wiring is faulty (short circuit, open circuit). The hard disk drive is faulty. The main controller PCB is faulty. A data read error (from the hard disk) was detected when the hard disk was started from the boot ROM.
E535-0001Description: The swing motor clock sensor (PI20) is faulty. The swing guide open sensor (PI18) is faulty. The safety area switch (MS3) is faulty. The swing guide closed detecting switch 2 (MS6) is faulty. The swing motor (M7) is faulty. The finisher cont
E202-0001Description: The scanner HP sensor (PS39) is faulty. The scanner motor (M3) is faulty. The reader controller PCB is faulty. The scanner HP sensor does not turn off even when the scanner has been moved 40 mm forward after the main power switch has been t
E315-0010Description: Main controller PCB, Hard disk drive When a start command is sent to the compression/extension element of the main controller at time of decoding, an end interrupt does not occur after 4 sec.
E248-0003Description: The EEPROM on the reader controller PCB is faulty. The reader controller PCB is faulty. When data is written, the ID in the EEPROM and the ID in the ROM are found not to match.

Canon iR5020i Common Errors

The most common error codes.

Error
E602-0002Description: The wiring is faulty (short circuit, open circuit). The hard disk drive is faulty. The main controller PCB is faulty. A data read error (from the hard disk) was detected when the hard disk was started from the boot ROM.
E535-0001Description: The swing motor clock sensor (PI20) is faulty. The swing guide open sensor (PI18) is faulty. The safety area switch (MS3) is faulty. The swing guide closed detecting switch 2 (MS6) is faulty. The swing motor (M7) is faulty. The finisher cont
E202-0001Description: The scanner HP sensor (PS39) is faulty. The scanner motor (M3) is faulty. The reader controller PCB is faulty. The scanner HP sensor does not turn off even when the scanner has been moved 40 mm forward after the main power switch has been t
E315-0010Description: Main controller PCB, Hard disk drive When a start command is sent to the compression/extension element of the main controller at time of decoding, an end interrupt does not occur after 4 sec.
E248-0003Description: The EEPROM on the reader controller PCB is faulty. The reader controller PCB is faulty. When data is written, the ID in the EEPROM and the ID in the ROM are found not to match.
E602-0002Description: The wiring is faulty (short circuit, open circuit). The hard disk drive is faulty. The main controller PCB is faulty. A data read error (from the hard disk) was detected when the hard disk was started from the boot ROM.
E535-0001Description: The swing motor clock sensor (PI20) is faulty. The swing guide open sensor (PI18) is faulty. The safety area switch (MS3) is faulty. The swing guide closed detecting switch 2 (MS6) is faulty. The swing motor (M7) is faulty. The finisher cont
E202-0001Description: The scanner HP sensor (PS39) is faulty. The scanner motor (M3) is faulty. The reader controller PCB is faulty. The scanner HP sensor does not turn off even when the scanner has been moved 40 mm forward after the main power switch has been t
E315-0010Description: Main controller PCB, Hard disk drive When a start command is sent to the compression/extension element of the main controller at time of decoding, an end interrupt does not occur after 4 sec.
E248-0003Description: The EEPROM on the reader controller PCB is faulty. The reader controller PCB is faulty. When data is written, the ID in the EEPROM and the ID in the ROM are found not to match.