Canon iR5000i Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR5000i Top Searches

These results are ranked by popularity.

Error
E602-0004Description: The wiring is faulty (short circuit, open circuit). The hard disk drive is faulty. The main controller PCB is faulty. A an error is found in the read/write address for the hard disk.
E061-0002Description: The laser shutter is faulty. The laser unit is faulty. The potential measurement PCB is faulty. The DC controller PCB is faulty. The primary charging output used for print output and the drum surface potential after laser output has been ma
E500-0001Description: The finisher controller PCB is faulty. The DC controller PCB is faulty. The communication between the host machine and the finisher has been interrupted; this error is detected by the host machine.
E804-0000Description: The wiring is faulty (short circuit, open circuit). The DC power supply fan (FM6) is faulty. The DC controller PCB is faulty. While the DC power supply fan is being driven, the clock signal (FM6CLK) does not arrive for 5 secs or more.
E530-0002Description: The alignment plate home position sensor (PI6) is faulty. The alignment motor (M3) is faulty. The finisher controller PCB is faulty. The alignment plate does not return to home position when the alignment motor has been driven for 2 secs.

Canon iR5000i Common Errors

The most common error codes.

Error
E602-0004Description: The wiring is faulty (short circuit, open circuit). The hard disk drive is faulty. The main controller PCB is faulty. A an error is found in the read/write address for the hard disk.
E061-0002Description: The laser shutter is faulty. The laser unit is faulty. The potential measurement PCB is faulty. The DC controller PCB is faulty. The primary charging output used for print output and the drum surface potential after laser output has been ma
E500-0001Description: The finisher controller PCB is faulty. The DC controller PCB is faulty. The communication between the host machine and the finisher has been interrupted; this error is detected by the host machine.
E804-0000Description: The wiring is faulty (short circuit, open circuit). The DC power supply fan (FM6) is faulty. The DC controller PCB is faulty. While the DC power supply fan is being driven, the clock signal (FM6CLK) does not arrive for 5 secs or more.
E530-0002Description: The alignment plate home position sensor (PI6) is faulty. The alignment motor (M3) is faulty. The finisher controller PCB is faulty. The alignment plate does not return to home position when the alignment motor has been driven for 2 secs.
E602-0004Description: The wiring is faulty (short circuit, open circuit). The hard disk drive is faulty. The main controller PCB is faulty. A an error is found in the read/write address for the hard disk.
E061-0002Description: The laser shutter is faulty. The laser unit is faulty. The potential measurement PCB is faulty. The DC controller PCB is faulty. The primary charging output used for print output and the drum surface potential after laser output has been ma
E500-0001Description: The finisher controller PCB is faulty. The DC controller PCB is faulty. The communication between the host machine and the finisher has been interrupted; this error is detected by the host machine.
E804-0000Description: The wiring is faulty (short circuit, open circuit). The DC power supply fan (FM6) is faulty. The DC controller PCB is faulty. While the DC power supply fan is being driven, the clock signal (FM6CLK) does not arrive for 5 secs or more.
E530-0002Description: The alignment plate home position sensor (PI6) is faulty. The alignment motor (M3) is faulty. The finisher controller PCB is faulty. The alignment plate does not return to home position when the alignment motor has been driven for 2 secs.