These results are ranked by popularity.
Error | |
---|---|
E5F1-0002 | Description: The folding roller does to return to home position when the stapler/folder motor is driven for 3.5 sec or more |
E514-0000 | Description: At the start of the motor CW operation, the stack handling motor (M2) may be driven for a specific number of rotations; however, the stack delivery lever home position sensor (S8) does not go ON |
E064-0000 | Description: The presence of a high-voltage error is communicated by the composite power supply PCB (The output for primary charging, developing, or transfer has deviated from a specific level of voltage) |
E743-0000 | Description: The reader controller PCB detects a fault in the communication between the main controller PCB and the reader controller PCB |
E220-0001 | Description: A fault is detected on the inverter PCB for the scanning lamp |
The most common error codes.
Error | |
---|---|
E5F1-0002 | Description: The folding roller does to return to home position when the stapler/folder motor is driven for 3.5 sec or more |
E514-0000 | Description: At the start of the motor CW operation, the stack handling motor (M2) may be driven for a specific number of rotations; however, the stack delivery lever home position sensor (S8) does not go ON |
E064-0000 | Description: The presence of a high-voltage error is communicated by the composite power supply PCB (The output for primary charging, developing, or transfer has deviated from a specific level of voltage) |
E743-0000 | Description: The reader controller PCB detects a fault in the communication between the main controller PCB and the reader controller PCB |
E220-0001 | Description: A fault is detected on the inverter PCB for the scanning lamp |
E5F1-0002 | Description: The folding roller does to return to home position when the stapler/folder motor is driven for 3.5 sec or more |
E514-0000 | Description: At the start of the motor CW operation, the stack handling motor (M2) may be driven for a specific number of rotations; however, the stack delivery lever home position sensor (S8) does not go ON |
E064-0000 | Description: The presence of a high-voltage error is communicated by the composite power supply PCB (The output for primary charging, developing, or transfer has deviated from a specific level of voltage) |
E743-0000 | Description: The reader controller PCB detects a fault in the communication between the main controller PCB and the reader controller PCB |
E220-0001 | Description: A fault is detected on the inverter PCB for the scanning lamp |