Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR3320i Top Searches

These results are ranked by popularity.

Error
E711-0003Description: Data is written to the error register of the communication IC (IPC) on the main controller PCB four times or more within 2 sec
E202-0001Description: The scanner home position sensor does not go OFF when the scanner is moved forward by 40 mm
E537-0000Description: The aligning plate home position sensor (S6) does not go ON when the front alignment motor (M3) is driven for a specific number of rotations. The aligning plate home position sensor (S6) does not go OFF when the front alignment motor (M3) is
E592-0001 ... E592-0005Description: In the course of sensor output automatic adjustment, the light-receiving voltage is 2.5 V or less even when the light-emitting voltage is set to 4.4 V. In the course of output automatic adjustment, the light-receiving voltage is 2.5 V or mor
E580-0000Description: The delivery tray upper limit sensor (S13) goes ON while the delivery tray ascent/descent motor (M5) is in operation. The clock signal of the delivery tray ascent/descent motor clock sensor (S9) is not detected 15 times or more within 0.8 s

Canon iR3320i Common Errors

The most common error codes.

Error
E711-0003Description: Data is written to the error register of the communication IC (IPC) on the main controller PCB four times or more within 2 sec
E202-0001Description: The scanner home position sensor does not go OFF when the scanner is moved forward by 40 mm
E537-0000Description: The aligning plate home position sensor (S6) does not go ON when the front alignment motor (M3) is driven for a specific number of rotations. The aligning plate home position sensor (S6) does not go OFF when the front alignment motor (M3) is
E592-0001 ... E592-0005Description: In the course of sensor output automatic adjustment, the light-receiving voltage is 2.5 V or less even when the light-emitting voltage is set to 4.4 V. In the course of output automatic adjustment, the light-receiving voltage is 2.5 V or mor
E580-0000Description: The delivery tray upper limit sensor (S13) goes ON while the delivery tray ascent/descent motor (M5) is in operation. The clock signal of the delivery tray ascent/descent motor clock sensor (S9) is not detected 15 times or more within 0.8 s
E202-0001Description: The scanner home position sensor does not go OFF when the scanner is moved forward by 40 mm
E537-0000Description: The aligning plate home position sensor (S6) does not go ON when the front alignment motor (M3) is driven for a specific number of rotations. The aligning plate home position sensor (S6) does not go OFF when the front alignment motor (M3) is
E711-0003Description: Data is written to the error register of the communication IC (IPC) on the main controller PCB four times or more within 2 sec
E000-0000Description: The reading of the main thermistor does not reach 30C 1 sec after the main power switch is turned on. Or, it does not reach 70C 2 sec thereafter
E737-0000Description: During self diagnosis at power-on, the DRAM check finds a fault in the main controller PCB