Canon iR3320 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR3320 Top Searches

These results are ranked by popularity.

Error
E711-0003Description: Data is written to the error register of the communication IC (IPC) on the main controller PCB four times or more within 2 sec
E540-0002Description: The tray upper sensor goes ON while the tray is moving up.
E248-0001Description: A difference is discovered between the ID in EEPROM read when the main power switch is turned on and the ID in ROM upon comparison
E501-0001Description: The communication between the finisher controller PCB and the puncher drive PCB is disrupted
E010-0000Description: After the main motor drive signal is generated, the clock signal does to arrive within 1.3 sec

Canon iR3320 Common Errors

The most common error codes.

Error
E711-0003Description: Data is written to the error register of the communication IC (IPC) on the main controller PCB four times or more within 2 sec
E540-0002Description: The tray upper sensor goes ON while the tray is moving up.
E248-0001Description: A difference is discovered between the ID in EEPROM read when the main power switch is turned on and the ID in ROM upon comparison
E501-0001Description: The communication between the finisher controller PCB and the puncher drive PCB is disrupted
E010-0000Description: After the main motor drive signal is generated, the clock signal does to arrive within 1.3 sec
E711-0003Description: Data is written to the error register of the communication IC (IPC) on the main controller PCB four times or more within 2 sec
E540-0002Description: The tray upper sensor goes ON while the tray is moving up.
E248-0001Description: A difference is discovered between the ID in EEPROM read when the main power switch is turned on and the ID in ROM upon comparison
E501-0001Description: The communication between the finisher controller PCB and the puncher drive PCB is disrupted
E010-0000Description: After the main motor drive signal is generated, the clock signal does to arrive within 1.3 sec