Canon iR3235i Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR3235i Top Searches

These results are ranked by popularity.

Error
E590-0001Description: Punch motor error The punching home position is not detected even when the puncher motor has been driven for 20 msec.
E530-8002Description: Rear alignment error (Finisher-S1) The home position sensor does not go off within 1000 msec after the start of operation when the rear aligning plate is shifted from home position.
E744-0003Description: There is an error in the language file/boot ROM. There is no language file on the HDD indicated by config.txt for a switchover.
E315-0540Description: There is an error in image data. Device: timeout error [Location to be detected] image process module (JPDE) [Detection timing] when there is no interruption 2 min after the operation has been started.
E711-0001Description: There is an error in the IPC communication. The occurrence of an error has been recorded in the error register of the IPC chip 4 times or more within 1.5 sec.

Canon iR3235i Common Errors

The most common error codes.

Error
E590-0001Description: Punch motor error The punching home position is not detected even when the puncher motor has been driven for 20 msec.
E530-8002Description: Rear alignment error (Finisher-S1) The home position sensor does not go off within 1000 msec after the start of operation when the rear aligning plate is shifted from home position.
E744-0003Description: There is an error in the language file/boot ROM. There is no language file on the HDD indicated by config.txt for a switchover.
E315-0540Description: There is an error in image data. Device: timeout error [Location to be detected] image process module (JPDE) [Detection timing] when there is no interruption 2 min after the operation has been started.
E711-0001Description: There is an error in the IPC communication. The occurrence of an error has been recorded in the error register of the IPC chip 4 times or more within 1.5 sec.
E590-0001Description: Punch motor error The punching home position is not detected even when the puncher motor has been driven for 20 msec.
E530-8002Description: Rear alignment error (Finisher-S1) The home position sensor does not go off within 1000 msec after the start of operation when the rear aligning plate is shifted from home position.
E744-0003Description: There is an error in the language file/boot ROM. There is no language file on the HDD indicated by config.txt for a switchover.
E315-0540Description: There is an error in image data. Device: timeout error [Location to be detected] image process module (JPDE) [Detection timing] when there is no interruption 2 min after the operation has been started.
E711-0001Description: There is an error in the IPC communication. The occurrence of an error has been recorded in the error register of the IPC chip 4 times or more within 1.5 sec.