Canon iR3230i Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR3230i Top Searches

These results are ranked by popularity.

Error
E202-0001Description: There is an error in the detection of the CCD home position. The attempt to detect the home position fails when the CCD is moved forward.
E315-0560Description: There is an error in image data. Device: timeout error [Location to be detected] image process module (PRIO) [Detection timing] when there is no interruption 2 min after the operation has been started.
E532-8002Description: Stapler shift error (Finisher-S1) The stapler slide home position sensor does not go off within 1.0 sec when the stapler is shifted from home position.
E602-05XXDescription: There is an error on the hard disk. /DOSDEV3 is faulty.
E592-0009Description: Paper trailing edge sensor/ registration sensor error Error in light-receiving voltage when light is not emitted (horizontal registration sensor 4)

Canon iR3230i Common Errors

The most common error codes.

Error
E202-0001Description: There is an error in the detection of the CCD home position. The attempt to detect the home position fails when the CCD is moved forward.
E315-0560Description: There is an error in image data. Device: timeout error [Location to be detected] image process module (PRIO) [Detection timing] when there is no interruption 2 min after the operation has been started.
E532-8002Description: Stapler shift error (Finisher-S1) The stapler slide home position sensor does not go off within 1.0 sec when the stapler is shifted from home position.
E602-05XXDescription: There is an error on the hard disk. /DOSDEV3 is faulty.
E592-0009Description: Paper trailing edge sensor/ registration sensor error Error in light-receiving voltage when light is not emitted (horizontal registration sensor 4)
E315-0560Description: There is an error in image data. Device: timeout error [Location to be detected] image process module (PRIO) [Detection timing] when there is no interruption 2 min after the operation has been started.
E532-8002Description: Stapler shift error (Finisher-S1) The stapler slide home position sensor does not go off within 1.0 sec when the stapler is shifted from home position.
E202-0001Description: There is an error in the detection of the CCD home position. The attempt to detect the home position fails when the CCD is moved forward.
E592-0009Description: Paper trailing edge sensor/ registration sensor error Error in light-receiving voltage when light is not emitted (horizontal registration sensor 4)
E602-05XXDescription: There is an error on the hard disk. /DOSDEV3 is faulty.