These results are ranked by popularity.
Error | |
---|---|
E537-8002 | Description: Front alignment error (Finisher-S1) The home position sensor dos not go off within 1.0 sec when the front aligning plate is shifted from home position. |
E677-0004 | Description: Failure in PS Printer Kit-AA1 Failure in CPU cooling fan of PS Printer Kit-AA1 |
E5F8-0002 | Description: Saddle connector error The connector of the paper butting plate home position sensor has been identified as being disconnected. Connector of paper butting plate home position sensor (PI14S) |
E064-0001 | Description: The voltage of the power supply is faulty (high-voltage error). The value read from the EEPORM is outside a specific range. |
E519-0002 | Description: Gear change motor error (External finisher) The home position sensor does not go on even when the gear change motor has rotated for a specific period of time. |
The most common error codes.
Error | |
---|---|
E537-8002 | Description: Front alignment error (Finisher-S1) The home position sensor dos not go off within 1.0 sec when the front aligning plate is shifted from home position. |
E677-0004 | Description: Failure in PS Printer Kit-AA1 Failure in CPU cooling fan of PS Printer Kit-AA1 |
E5F8-0002 | Description: Saddle connector error The connector of the paper butting plate home position sensor has been identified as being disconnected. Connector of paper butting plate home position sensor (PI14S) |
E064-0001 | Description: The voltage of the power supply is faulty (high-voltage error). The value read from the EEPORM is outside a specific range. |
E519-0002 | Description: Gear change motor error (External finisher) The home position sensor does not go on even when the gear change motor has rotated for a specific period of time. |
E537-8002 | Description: Front alignment error (Finisher-S1) The home position sensor dos not go off within 1.0 sec when the front aligning plate is shifted from home position. |
E677-0004 | Description: Failure in PS Printer Kit-AA1 Failure in CPU cooling fan of PS Printer Kit-AA1 |
E5F8-0002 | Description: Saddle connector error The connector of the paper butting plate home position sensor has been identified as being disconnected. Connector of paper butting plate home position sensor (PI14S) |
E064-0001 | Description: The voltage of the power supply is faulty (high-voltage error). The value read from the EEPORM is outside a specific range. |
E519-0002 | Description: Gear change motor error (External finisher) The home position sensor does not go on even when the gear change motor has rotated for a specific period of time. |