These results are ranked by popularity.
| Error | |
|---|---|
| E745-0002 | Description: There is a fault on the TokenRing board. The MAC address is faulty. |
| E514-0002 | Description: fault in stack delivery motor (Finisher-S1) When the stack retaining spacer is shifted from home position, the belt escape home position sensor does not go off within 1.5 sec. |
| E732-9999 | Description: There is an error in the communication with the scanner A scanner is first detected from the printer model. (Not an error code but only the message 'Turn the main power switch OFF&ON again' is displayed on the users screen. The error is rec |
| E602-01XX | Description: There is an error on the hard disk. /DOSDEV is faulty |
| E003-0000 | Description: The fixing temperature is too low after a standby state. While regular temperature control is under way, the reading of the main thermistor is less than 140 deg C continuously for 400 msec or more |
The most common error codes.
| Error | |
|---|---|
| E745-0002 | Description: There is a fault on the TokenRing board. The MAC address is faulty. |
| E514-0002 | Description: fault in stack delivery motor (Finisher-S1) When the stack retaining spacer is shifted from home position, the belt escape home position sensor does not go off within 1.5 sec. |
| E732-9999 | Description: There is an error in the communication with the scanner A scanner is first detected from the printer model. (Not an error code but only the message 'Turn the main power switch OFF&ON again' is displayed on the users screen. The error is rec |
| E602-01XX | Description: There is an error on the hard disk. /DOSDEV is faulty |
| E003-0000 | Description: The fixing temperature is too low after a standby state. While regular temperature control is under way, the reading of the main thermistor is less than 140 deg C continuously for 400 msec or more |
| E745-0002 | Description: There is a fault on the TokenRing board. The MAC address is faulty. |
| E514-0002 | Description: fault in stack delivery motor (Finisher-S1) When the stack retaining spacer is shifted from home position, the belt escape home position sensor does not go off within 1.5 sec. |
| E732-9999 | Description: There is an error in the communication with the scanner A scanner is first detected from the printer model. (Not an error code but only the message 'Turn the main power switch OFF&ON again' is displayed on the users screen. The error is rec |
| E602-01XX | Description: There is an error on the hard disk. /DOSDEV is faulty |
| E003-0000 | Description: The fixing temperature is too low after a standby state. While regular temperature control is under way, the reading of the main thermistor is less than 140 deg C continuously for 400 msec or more |
