These results are ranked by popularity.
Error | |
---|---|
E805-0002 | Description: There is a fan error. Failure in heat exhaust fan (rear) (FM1) When lock signal is detected for 5 sec while the fan is stopped. |
E602-0006 | Description: There is an error on the hard disk. [Cause] A subbootable that matches the PDL type does not exit in BOOTDEV/BOOT. [Detection] during loading of sub boot in oclibroot [Timing of Detection] once at bootable startup |
E261-0000 | Description: The zero-cross signal is faulty. When the relay is on, the zero-cross signal is not detected for 500 msec or more. |
E677-0080 | Description: Failure in PS Printer Kit-AA1 Communication error between PS Printer Kit-AA1 and the main controller of the host machine after PS Printer Kit-AA1 is started |
E540-0003 | Description: Area error |
The most common error codes.
Error | |
---|---|
E805-0002 | Description: There is a fan error. Failure in heat exhaust fan (rear) (FM1) When lock signal is detected for 5 sec while the fan is stopped. |
E602-0006 | Description: There is an error on the hard disk. [Cause] A subbootable that matches the PDL type does not exit in BOOTDEV/BOOT. [Detection] during loading of sub boot in oclibroot [Timing of Detection] once at bootable startup |
E261-0000 | Description: The zero-cross signal is faulty. When the relay is on, the zero-cross signal is not detected for 500 msec or more. |
E677-0080 | Description: Failure in PS Printer Kit-AA1 Communication error between PS Printer Kit-AA1 and the main controller of the host machine after PS Printer Kit-AA1 is started |
E540-0003 | Description: Area error |
E805-0002 | Description: There is a fan error. Failure in heat exhaust fan (rear) (FM1) When lock signal is detected for 5 sec while the fan is stopped. |
E602-0006 | Description: There is an error on the hard disk. [Cause] A subbootable that matches the PDL type does not exit in BOOTDEV/BOOT. [Detection] during loading of sub boot in oclibroot [Timing of Detection] once at bootable startup |
E261-0000 | Description: The zero-cross signal is faulty. When the relay is on, the zero-cross signal is not detected for 500 msec or more. |
E677-0080 | Description: Failure in PS Printer Kit-AA1 Communication error between PS Printer Kit-AA1 and the main controller of the host machine after PS Printer Kit-AA1 is started |
E540-0003 | Description: Area error |