These results are ranked by popularity.
| Error | |
|---|---|
| E315-0510 | Description: There is an error in image data. Device: timeout error [Location to be detected] image process module (SCIP) [Detection timing] when there is no interruption 2 min after the operation has been started. |
| E719-0012 | Description: There is a coin vendor error. An IPC error has occurred at new card reader startup. There is an IPC open circuit. An error has occurred that prevents recovery of IPC communication. |
| E064-0003 | Description: The voltage of the power supply is faulty (high-voltage error). While output is being generated, the AD value of the developing DC voltage is 224 (DEC) or more for 10 msec 2 times in sequence. (However, after output, it is not detected for |
| E530-0002 | Description: Front alignment error (External finisher) The home position sensor does not go on even when the front alignment motor has been rotated for a specific period of time. |
| E591-0001 | Description: Punch dust sensor error Error in light-receiving voltage while light is emitted |
The most common error codes.
| Error | |
|---|---|
| E315-0510 | Description: There is an error in image data. Device: timeout error [Location to be detected] image process module (SCIP) [Detection timing] when there is no interruption 2 min after the operation has been started. |
| E719-0012 | Description: There is a coin vendor error. An IPC error has occurred at new card reader startup. There is an IPC open circuit. An error has occurred that prevents recovery of IPC communication. |
| E064-0003 | Description: The voltage of the power supply is faulty (high-voltage error). While output is being generated, the AD value of the developing DC voltage is 224 (DEC) or more for 10 msec 2 times in sequence. (However, after output, it is not detected for |
| E530-0002 | Description: Front alignment error (External finisher) The home position sensor does not go on even when the front alignment motor has been rotated for a specific period of time. |
| E591-0001 | Description: Punch dust sensor error Error in light-receiving voltage while light is emitted |
| E315-0510 | Description: There is an error in image data. Device: timeout error [Location to be detected] image process module (SCIP) [Detection timing] when there is no interruption 2 min after the operation has been started. |
| E719-0012 | Description: There is a coin vendor error. An IPC error has occurred at new card reader startup. There is an IPC open circuit. An error has occurred that prevents recovery of IPC communication. |
| E064-0003 | Description: The voltage of the power supply is faulty (high-voltage error). While output is being generated, the AD value of the developing DC voltage is 224 (DEC) or more for 10 msec 2 times in sequence. (However, after output, it is not detected for |
| E530-0002 | Description: Front alignment error (External finisher) The home position sensor does not go on even when the front alignment motor has been rotated for a specific period of time. |
| E591-0001 | Description: Punch dust sensor error Error in light-receiving voltage while light is emitted |
