These results are ranked by popularity.
| Error | |
|---|---|
| E400-0001 | Description: Fault in communication with the ADF driver PCB The checksum values of data from the ADF driver PCB are inconsistent 14 times consecutively. |
| E719-0001 | Description: There is a coin vendor error. The coin vendor is not connected when the power is turned on, although it was connected before the power was turned off because of an error. |
| E227-0004 | Description: The reader unit power supply (24V) is faulty. When a load is being driven, the 24V port is off. |
| E5F9-0003 | Description: Saddle switch error The delivery cover switch has been identified as being open after the start of printing or the start of initial rotation of the host machine with the following sensors identifying their respective covers as being closed: |
| E003-0000 | Description: The fixing temperature is too low after a standby state. While regular temperature control is under way, the reading of the main thermistor is less than 140 deg C continuously for 400 msec or more |
The most common error codes.
| Error | |
|---|---|
| E400-0001 | Description: Fault in communication with the ADF driver PCB The checksum values of data from the ADF driver PCB are inconsistent 14 times consecutively. |
| E719-0001 | Description: There is a coin vendor error. The coin vendor is not connected when the power is turned on, although it was connected before the power was turned off because of an error. |
| E227-0004 | Description: The reader unit power supply (24V) is faulty. When a load is being driven, the 24V port is off. |
| E5F9-0003 | Description: Saddle switch error The delivery cover switch has been identified as being open after the start of printing or the start of initial rotation of the host machine with the following sensors identifying their respective covers as being closed: |
| E003-0000 | Description: The fixing temperature is too low after a standby state. While regular temperature control is under way, the reading of the main thermistor is less than 140 deg C continuously for 400 msec or more |
| E400-0001 | Description: Fault in communication with the ADF driver PCB The checksum values of data from the ADF driver PCB are inconsistent 14 times consecutively. |
| E719-0001 | Description: There is a coin vendor error. The coin vendor is not connected when the power is turned on, although it was connected before the power was turned off because of an error. |
| E227-0004 | Description: The reader unit power supply (24V) is faulty. When a load is being driven, the 24V port is off. |
| E5F9-0003 | Description: Saddle switch error The delivery cover switch has been identified as being open after the start of printing or the start of initial rotation of the host machine with the following sensors identifying their respective covers as being closed: |
| E003-0000 | Description: The fixing temperature is too low after a standby state. While regular temperature control is under way, the reading of the main thermistor is less than 140 deg C continuously for 400 msec or more |
