Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR3100CN Top Searches

These results are ranked by popularity.

Error
E400-0002Description: Feeder communication error Reception status error
E717-0001Description: Communication error with the NE controller The NE controller connected before the power is turned off fails to be recognized at power-on.
E045-0001Description: OHP sensor error The sampling data measured during initial multiple rotations is lower than the specific level.
E5F2-0001Description: Saddle guide error The guide HP sensor fails to be ON after the guide motor is driven for 0.455 sec.
E010-0001Description: Main motor error Lock of the motor fails to be detected 2 sec or more after the motor starts to operate.

Canon iR3100CN Common Errors

The most common error codes.

Error
E400-0002Description: Feeder communication error Reception status error
E717-0001Description: Communication error with the NE controller The NE controller connected before the power is turned off fails to be recognized at power-on.
E045-0001Description: OHP sensor error The sampling data measured during initial multiple rotations is lower than the specific level.
E5F2-0001Description: Saddle guide error The guide HP sensor fails to be ON after the guide motor is driven for 0.455 sec.
E010-0001Description: Main motor error Lock of the motor fails to be detected 2 sec or more after the motor starts to operate.
E400-0002Description: Feeder communication error Reception status error
E717-0001Description: Communication error with the NE controller The NE controller connected before the power is turned off fails to be recognized at power-on.
E045-0001Description: OHP sensor error The sampling data measured during initial multiple rotations is lower than the specific level.
E5F2-0001Description: Saddle guide error The guide HP sensor fails to be ON after the guide motor is driven for 0.455 sec.
E010-0001Description: Main motor error Lock of the motor fails to be detected 2 sec or more after the motor starts to operate.