Canon iR3100C Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR3100C Top Searches

These results are ranked by popularity.

Error
E067-0110Description: High voltage-related error The measured voltage of the primary transfer ATVC is abnormal twice in succession.
E5F3-0001Description: Saddle alignment error The adjuster plate HP sensor fails to be ON after the jog motor is driven for 0.5 sec. (for 1.67 sec. during initial operation)
E012-0001Description: Drum motor error Lock of the motor fails to be detected 2 sec or more after the motor starts to operate.
E540-0003Description: Upper tray up/down error The safety switch is activated.
E532-0001Description: Staple unit shift error Finisher-P1 The HP sensor fails to be ON within 11000ms after the staple unit starts to move to the stapling HP.

Canon iR3100C Common Errors

The most common error codes.

Error
E067-0110Description: High voltage-related error The measured voltage of the primary transfer ATVC is abnormal twice in succession.
E5F3-0001Description: Saddle alignment error The adjuster plate HP sensor fails to be ON after the jog motor is driven for 0.5 sec. (for 1.67 sec. during initial operation)
E012-0001Description: Drum motor error Lock of the motor fails to be detected 2 sec or more after the motor starts to operate.
E540-0003Description: Upper tray up/down error The safety switch is activated.
E532-0001Description: Staple unit shift error Finisher-P1 The HP sensor fails to be ON within 11000ms after the staple unit starts to move to the stapling HP.
E067-0110Description: High voltage-related error The measured voltage of the primary transfer ATVC is abnormal twice in succession.
E5F3-0001Description: Saddle alignment error The adjuster plate HP sensor fails to be ON after the jog motor is driven for 0.5 sec. (for 1.67 sec. during initial operation)
E012-0001Description: Drum motor error Lock of the motor fails to be detected 2 sec or more after the motor starts to operate.
E540-0003Description: Upper tray up/down error The safety switch is activated.
E532-0001Description: Staple unit shift error Finisher-P1 The HP sensor fails to be ON within 11000ms after the staple unit starts to move to the stapling HP.