These results are ranked by popularity.
Error | |
---|---|
E540-8002 | Description: Stack tray motor error (Finisher-S1) The operation to detect the paper surface of the stack tray does not end within 1.0 sec. |
E5F4-0002 | Description: Saddle rear stapling error The stitching home position sensor does not go off when the stitch motor (rear) has been rotated in normal direction for 0.5 sec or more. Stitch motor (rear; MS)/ stitching home position sensor (rear; MS5S) |
E227-0001 | Description: The reader unit power supply is faulty. At time of power-on, the 24-V port is off. |
E514-0001 | Description: fault in stack delivery motor (Finisher-S1) When the stack retaining spacer is returned to home position, the belt escape home position sensor does not go on within 1.5 sec. |
E717-0002 | Description: There is an error in the communication with the NE controller. An IPC error has occurred while the NE controller is in operation. There is an open circuit for the IPC. An error has occurred, and the IPC communication remains disabled |
The most common error codes.
Error | |
---|---|
E540-8002 | Description: Stack tray motor error (Finisher-S1) The operation to detect the paper surface of the stack tray does not end within 1.0 sec. |
E5F4-0002 | Description: Saddle rear stapling error The stitching home position sensor does not go off when the stitch motor (rear) has been rotated in normal direction for 0.5 sec or more. Stitch motor (rear; MS)/ stitching home position sensor (rear; MS5S) |
E227-0001 | Description: The reader unit power supply is faulty. At time of power-on, the 24-V port is off. |
E514-0001 | Description: fault in stack delivery motor (Finisher-S1) When the stack retaining spacer is returned to home position, the belt escape home position sensor does not go on within 1.5 sec. |
E717-0002 | Description: There is an error in the communication with the NE controller. An IPC error has occurred while the NE controller is in operation. There is an open circuit for the IPC. An error has occurred, and the IPC communication remains disabled |
E540-8002 | Description: Stack tray motor error (Finisher-S1) The operation to detect the paper surface of the stack tray does not end within 1.0 sec. |
E5F4-0002 | Description: Saddle rear stapling error The stitching home position sensor does not go off when the stitch motor (rear) has been rotated in normal direction for 0.5 sec or more. Stitch motor (rear; MS)/ stitching home position sensor (rear; MS5S) |
E227-0001 | Description: The reader unit power supply is faulty. At time of power-on, the 24-V port is off. |
E514-0001 | Description: fault in stack delivery motor (Finisher-S1) When the stack retaining spacer is returned to home position, the belt escape home position sensor does not go on within 1.5 sec. |
E717-0002 | Description: There is an error in the communication with the NE controller. An IPC error has occurred while the NE controller is in operation. There is an open circuit for the IPC. An error has occurred, and the IPC communication remains disabled |