These results are ranked by popularity.
| Error | |
|---|---|
| E719-0002 | Description: There is a coin vendor error. While the coin vendor is in operation, an IPC error has occurred, IPC has developed an open circuit, or an error preventing recovery of IPC communication has occurred. An open circuit has been detected in the li |
| E5F6-0002 | Description: Saddle butting error The paper butting plate home position sensor does not go off when the paper butting plate motor has been driven for 80 msec or more. Paper butting plate motor (M8S)/paper butting plate home position sensor (PI14S) |
| E577-8001 | Description: Paddle error (Finisher-S1) The paddle home position sensor does not go on within 1.5 sec when the paddle is shifted to home position. |
| E514-0002 | Description: fault in stack delivery motor (Finisher-S1)When the stack retaining spacer is shifted from home position, the belt escape home position sensor does not go off within 1.5 sec. |
| E064-0005 | Description: The voltage of the power supply is faulty (high-voltage error). While output is being generated, the AD value of the transfer output voltage is 0 (DEC) for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 mse |
The most common error codes.
| Error | |
|---|---|
| E719-0002 | Description: There is a coin vendor error. While the coin vendor is in operation, an IPC error has occurred, IPC has developed an open circuit, or an error preventing recovery of IPC communication has occurred. An open circuit has been detected in the li |
| E5F6-0002 | Description: Saddle butting error The paper butting plate home position sensor does not go off when the paper butting plate motor has been driven for 80 msec or more. Paper butting plate motor (M8S)/paper butting plate home position sensor (PI14S) |
| E577-8001 | Description: Paddle error (Finisher-S1) The paddle home position sensor does not go on within 1.5 sec when the paddle is shifted to home position. |
| E514-0002 | Description: fault in stack delivery motor (Finisher-S1)When the stack retaining spacer is shifted from home position, the belt escape home position sensor does not go off within 1.5 sec. |
| E064-0005 | Description: The voltage of the power supply is faulty (high-voltage error). While output is being generated, the AD value of the transfer output voltage is 0 (DEC) for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 mse |
| E719-0002 | Description: There is a coin vendor error. While the coin vendor is in operation, an IPC error has occurred, IPC has developed an open circuit, or an error preventing recovery of IPC communication has occurred. An open circuit has been detected in the li |
| E5F6-0002 | Description: Saddle butting error The paper butting plate home position sensor does not go off when the paper butting plate motor has been driven for 80 msec or more. Paper butting plate motor (M8S)/paper butting plate home position sensor (PI14S) |
| E577-8001 | Description: Paddle error (Finisher-S1) The paddle home position sensor does not go on within 1.5 sec when the paddle is shifted to home position. |
| E514-0002 | Description: fault in stack delivery motor (Finisher-S1)When the stack retaining spacer is shifted from home position, the belt escape home position sensor does not go off within 1.5 sec. |
| E064-0005 | Description: The voltage of the power supply is faulty (high-voltage error). While output is being generated, the AD value of the transfer output voltage is 0 (DEC) for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 mse |
