Canon iR3030A Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR3030A Top Searches

These results are ranked by popularity.

Error
E530-8002Description: Rear alignment error (Finisher-S1) The home position sensor does not go off within 1000 msec after the start of operation when the rear aligning plate is shifted from home position.
E602-03XXDescription: There is an error on the hard disk. /DOSDEV2 is faulty.
E593-0001Description: Punch shift motor error The light-receiving voltage home position sensor does not go off when light is emitted.
E744-1000Description: There is an error in the language file/boot ROM. The boot ROM that is mounted is of the wrong type.
E225-0001Description: The light intensity of the CIS is faulty. During shading operation, the intensity is below a specific level.

Canon iR3030A Common Errors

The most common error codes.

Error
E530-8002Description: Rear alignment error (Finisher-S1) The home position sensor does not go off within 1000 msec after the start of operation when the rear aligning plate is shifted from home position.
E602-03XXDescription: There is an error on the hard disk. /DOSDEV2 is faulty.
E593-0001Description: Punch shift motor error The light-receiving voltage home position sensor does not go off when light is emitted.
E744-1000Description: There is an error in the language file/boot ROM. The boot ROM that is mounted is of the wrong type.
E225-0001Description: The light intensity of the CIS is faulty. During shading operation, the intensity is below a specific level.
E530-8002Description: Rear alignment error (Finisher-S1) The home position sensor does not go off within 1000 msec after the start of operation when the rear aligning plate is shifted from home position.
E602-03XXDescription: There is an error on the hard disk. /DOSDEV2 is faulty.
E593-0001Description: Punch shift motor error The light-receiving voltage home position sensor does not go off when light is emitted.
E744-1000Description: There is an error in the language file/boot ROM. The boot ROM that is mounted is of the wrong type.
E225-0001Description: The light intensity of the CIS is faulty. During shading operation, the intensity is below a specific level.