Canon iR2530 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR2530 Top Searches

These results are ranked by popularity.

Error
E719-0002Description: Erroneous communication with Coin Vendor (serial communication)
E247-0000Description: Mismatched checksum between the Flash Rom and the FRAM
E004-0000Description: Thermistor disconnection detection error When disconnection is detected with connector (J214) for 30 sec continuously.
E805-0003Description: Unstable rotation of the Exhaust Fan (Front) (FAN4) When lock signal failed to be detected for 5 sec while the Exhaust Fan (Front) (FAN4) is driven. * The same condition is detected after the error retry is performed.
E531-8001Description: Stapler Motor (M10) error The stapler does not leave the staple home position when the Staple Motor (M10) has been driven for 0.5 sec.

Canon iR2530 Common Errors

The most common error codes.

Error
E719-0002Description: Erroneous communication with Coin Vendor (serial communication)
E247-0000Description: Mismatched checksum between the Flash Rom and the FRAM
E004-0000Description: Thermistor disconnection detection error When disconnection is detected with connector (J214) for 30 sec continuously.
E805-0003Description: Unstable rotation of the Exhaust Fan (Front) (FAN4) When lock signal failed to be detected for 5 sec while the Exhaust Fan (Front) (FAN4) is driven. * The same condition is detected after the error retry is performed.
E531-8001Description: Stapler Motor (M10) error The stapler does not leave the staple home position when the Staple Motor (M10) has been driven for 0.5 sec.
E719-0002Description: Erroneous communication with Coin Vendor (serial communication)
E247-0000Description: Mismatched checksum between the Flash Rom and the FRAM
E004-0000Description: Thermistor disconnection detection error When disconnection is detected with connector (J214) for 30 sec continuously.
E805-0003Description: Unstable rotation of the Exhaust Fan (Front) (FAN4) When lock signal failed to be detected for 5 sec while the Exhaust Fan (Front) (FAN4) is driven. * The same condition is detected after the error retry is performed.
E531-8001Description: Stapler Motor (M10) error The stapler does not leave the staple home position when the Staple Motor (M10) has been driven for 0.5 sec.