These results are ranked by popularity.
Error | |
---|---|
E110-0003 | Description: Failure of the Scanner Motor (M21) The scanner motor (M21) speed lock signal does not indicate a locked state for 6.5 sec. after a switchover is made from low to normal speed or for 8 sec. after a switchover is made from normal to low speed |
E531-8002 | Description: Stapler Motor (M10) error The stapler does not return to the staple home position when the Stapler Motor (M10) has been driven for 0.5 sec. |
E354-0000 | Description: Mismatched serial number for the SOFT-ID PCB |
E575-0001 | Description: Gripper Unit Move Motor (M2) error The gripper unit does not leave the gripper unit home position when the Gripper Unit Move Motor (M2) has been driven for 3.8 seconds. |
E744-0001 | Description: Mismatched version between the language file and the Bootable |
The most common error codes.
Error | |
---|---|
E110-0003 | Description: Failure of the Scanner Motor (M21) The scanner motor (M21) speed lock signal does not indicate a locked state for 6.5 sec. after a switchover is made from low to normal speed or for 8 sec. after a switchover is made from normal to low speed |
E531-8002 | Description: Stapler Motor (M10) error The stapler does not return to the staple home position when the Stapler Motor (M10) has been driven for 0.5 sec. |
E354-0000 | Description: Mismatched serial number for the SOFT-ID PCB |
E575-0001 | Description: Gripper Unit Move Motor (M2) error The gripper unit does not leave the gripper unit home position when the Gripper Unit Move Motor (M2) has been driven for 3.8 seconds. |
E744-0001 | Description: Mismatched version between the language file and the Bootable |
E110-0003 | Description: Failure of the Scanner Motor (M21) The scanner motor (M21) speed lock signal does not indicate a locked state for 6.5 sec. after a switchover is made from low to normal speed or for 8 sec. after a switchover is made from normal to low speed |
E531-8002 | Description: Stapler Motor (M10) error The stapler does not return to the staple home position when the Stapler Motor (M10) has been driven for 0.5 sec. |
E354-0000 | Description: Mismatched serial number for the SOFT-ID PCB |
E575-0001 | Description: Gripper Unit Move Motor (M2) error The gripper unit does not leave the gripper unit home position when the Gripper Unit Move Motor (M2) has been driven for 3.8 seconds. |
E744-0001 | Description: Mismatched version between the language file and the Bootable |