These results are ranked by popularity.
Error | |
---|---|
E805-0000 | Description: Failure of the Exhaust Fan (Rear) (FAN3) When lock signal is detected for 5 sec while the Exhaust Fan (Rear) (FAN3) is stopped. * The same condition is detected after the error retry is performed. |
E505-0001 | Description: EEPROM error The checksum for the EEPROM data has an error. |
E001-0002 | Description: Fixing unit temperature rise detection The reading of the sub thermistor is 295 deg C or more continuously for 200 msec. |
E567-0001 | Description: Shift Roller Release Motor (M5) error The shift roller does not leave the shift roller release home position when the Shift Roller Release Motor (M5) has been driven for 0.1 sec. |
E024-0001 | Description: The Developing Assembly Toner Sensor (TS1) is disconnected
|
The most common error codes.
Error | |
---|---|
E805-0000 | Description: Failure of the Exhaust Fan (Rear) (FAN3) When lock signal is detected for 5 sec while the Exhaust Fan (Rear) (FAN3) is stopped. * The same condition is detected after the error retry is performed. |
E505-0001 | Description: EEPROM error The checksum for the EEPROM data has an error. |
E001-0002 | Description: Fixing unit temperature rise detection The reading of the sub thermistor is 295 deg C or more continuously for 200 msec. |
E567-0001 | Description: Shift Roller Release Motor (M5) error The shift roller does not leave the shift roller release home position when the Shift Roller Release Motor (M5) has been driven for 0.1 sec. |
E024-0001 | Description: The Developing Assembly Toner Sensor (TS1) is disconnected
|
E805-0000 | Description: Failure of the Exhaust Fan (Rear) (FAN3) When lock signal is detected for 5 sec while the Exhaust Fan (Rear) (FAN3) is stopped. * The same condition is detected after the error retry is performed. |
E505-0001 | Description: EEPROM error The checksum for the EEPROM data has an error. |
E001-0002 | Description: Fixing unit temperature rise detection The reading of the sub thermistor is 295 deg C or more continuously for 200 msec. |
E567-0001 | Description: Shift Roller Release Motor (M5) error The shift roller does not leave the shift roller release home position when the Shift Roller Release Motor (M5) has been driven for 0.1 sec. |
E024-0001 | Description: The Developing Assembly Toner Sensor (TS1) is disconnected
|