These results are ranked by popularity.
Error | |
---|---|
E805-0000 | Description: Failure of the Exhaust Fan (Rear) (FAN3) When lock signal is detected for 5 sec while the Exhaust Fan (Rear) (FAN3) is stopped. * The same condition is detected after the error retry is performed. |
E355-0000 | Description: Mismatched serial number between the SOFT-ID, the Flash Rom and the FRAM |
E014-0002 | Description: Unstable rotation of the Fixing Motor (M2) During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence. |
E567-0001 | Description: Shift Roller Release Motor (M5) error The shift roller does not leave the shift roller release home position when the Shift Roller Release Motor (M5) has been driven for 0.1 sec. |
E197-0000 | Description: Error in communication of Laser Driver PCB (PCB14) Communication error 1 with image PCB |
The most common error codes.
Error | |
---|---|
E805-0000 | Description: Failure of the Exhaust Fan (Rear) (FAN3) When lock signal is detected for 5 sec while the Exhaust Fan (Rear) (FAN3) is stopped. * The same condition is detected after the error retry is performed. |
E355-0000 | Description: Mismatched serial number between the SOFT-ID, the Flash Rom and the FRAM |
E014-0002 | Description: Unstable rotation of the Fixing Motor (M2) During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence. |
E567-0001 | Description: Shift Roller Release Motor (M5) error The shift roller does not leave the shift roller release home position when the Shift Roller Release Motor (M5) has been driven for 0.1 sec. |
E197-0000 | Description: Error in communication of Laser Driver PCB (PCB14) Communication error 1 with image PCB |
E805-0000 | Description: Failure of the Exhaust Fan (Rear) (FAN3) When lock signal is detected for 5 sec while the Exhaust Fan (Rear) (FAN3) is stopped. * The same condition is detected after the error retry is performed. |
E355-0000 | Description: Mismatched serial number between the SOFT-ID, the Flash Rom and the FRAM |
E014-0002 | Description: Unstable rotation of the Fixing Motor (M2) During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence. |
E567-0001 | Description: Shift Roller Release Motor (M5) error The shift roller does not leave the shift roller release home position when the Shift Roller Release Motor (M5) has been driven for 0.1 sec. |
E197-0000 | Description: Error in communication of Laser Driver PCB (PCB14) Communication error 1 with image PCB |