Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR2520 Top Searches

These results are ranked by popularity.

Error
E355-0000Description: Mismatched serial number between the SOFT-ID, the Flash Rom and the FRAM
E805-0000Description: Failure of the Exhaust Fan (Rear) (FAN3) When lock signal is detected for 5 sec while the Exhaust Fan (Rear) (FAN3) is stopped. * The same condition is detected after the error retry is performed.
E014-0002Description: Unstable rotation of the Fixing Motor (M2) During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
E567-0001Description: Shift Roller Release Motor (M5) error The shift roller does not leave the shift roller release home position when the Shift Roller Release Motor (M5) has been driven for 0.1 sec.
E716-0010Description: Failure of the communication with the 2-way unit When the communication with the 2-way unit is faulty after detecting the connection with the finisher.

Canon iR2520 Common Errors

The most common error codes.

Error
E355-0000Description: Mismatched serial number between the SOFT-ID, the Flash Rom and the FRAM
E805-0000Description: Failure of the Exhaust Fan (Rear) (FAN3) When lock signal is detected for 5 sec while the Exhaust Fan (Rear) (FAN3) is stopped. * The same condition is detected after the error retry is performed.
E014-0002Description: Unstable rotation of the Fixing Motor (M2) During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
E567-0001Description: Shift Roller Release Motor (M5) error The shift roller does not leave the shift roller release home position when the Shift Roller Release Motor (M5) has been driven for 0.1 sec.
E716-0010Description: Failure of the communication with the 2-way unit When the communication with the 2-way unit is faulty after detecting the connection with the finisher.
E355-0000Description: Mismatched serial number between the SOFT-ID, the Flash Rom and the FRAM
E805-0000Description: Failure of the Exhaust Fan (Rear) (FAN3) When lock signal is detected for 5 sec while the Exhaust Fan (Rear) (FAN3) is stopped. * The same condition is detected after the error retry is performed.
E014-0002Description: Unstable rotation of the Fixing Motor (M2) During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
E567-0001Description: Shift Roller Release Motor (M5) error The shift roller does not leave the shift roller release home position when the Shift Roller Release Motor (M5) has been driven for 0.1 sec.
E716-0010Description: Failure of the communication with the 2-way unit When the communication with the 2-way unit is faulty after detecting the connection with the finisher.