Canon iR2422 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR2422 Top Searches

These results are ranked by popularity.

Error
E584-0002Description: - Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure The shutter open sensor did not turn off when 1000 ms have lapsed since the shutter unit had performed close operatio
E052-0000Description: Erroneous connection to duplex unit Disconnection of the duplex unit was detected after power-on, detection of normal connection to the duplex unit, and start of communication
E540-0002Description: - Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure Cannot move (to the pickup position) within the specified time.
E000-0000Description: Startup error The temperature detected by the main or sub thermistor does not rise to the specified value during startup control.
E716-0000Description: Erroneous communication with optional cassette Disconnection of the optional cassette was detected after power-on, detection of normal connection to the optional cassette, and start of communication.

Canon iR2422 Common Errors

The most common error codes.

Error
E584-0002Description: - Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure The shutter open sensor did not turn off when 1000 ms have lapsed since the shutter unit had performed close operatio
E052-0000Description: Erroneous connection to duplex unit Disconnection of the duplex unit was detected after power-on, detection of normal connection to the duplex unit, and start of communication
E540-0002Description: - Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure Cannot move (to the pickup position) within the specified time.
E000-0000Description: Startup error The temperature detected by the main or sub thermistor does not rise to the specified value during startup control.
E716-0000Description: Erroneous communication with optional cassette Disconnection of the optional cassette was detected after power-on, detection of normal connection to the optional cassette, and start of communication.
E584-0002Description: - Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure The shutter open sensor did not turn off when 1000 ms have lapsed since the shutter unit had performed close operatio
E052-0000Description: Erroneous connection to duplex unit Disconnection of the duplex unit was detected after power-on, detection of normal connection to the duplex unit, and start of communication
E540-0002Description: - Standard tray shift motor or finisher controller PCB failure - Standard tray HP sensor failure - Standard tray clock sensor failure - Standard tray shift motor load failure Cannot move (to the pickup position) within the specified time.
E000-0000Description: Startup error The temperature detected by the main or sub thermistor does not rise to the specified value during startup control.
E716-0000Description: Erroneous communication with optional cassette Disconnection of the optional cassette was detected after power-on, detection of normal connection to the optional cassette, and start of communication.